5 material differences · fewer than 12

Tractor oneFord 7095 (A)1976–1981No measured PTO figureTractor twoLamborghini R-1056 (DT)1977–1984No measured PTO figure

Which should you choose?

Read our verdict on the 7095 (A) and the R-1056 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

5 material differences · 5 fields identical or within 5%, which is not counted as material

Ford 7095 (A) and Lamborghini R-1056 (DT), field by field
Field7095 (A)R-1056 (DT)Gap
Engine
Engine power, claimed claimed103 hp103.5 hp—
Engine declaredFord 2714 ESAME DA 986-3 or 916-6 Wdiffers
Displacement declared6.22 L——
Maximum torque declared274 lb·ft · 372 N·m251 lb·ft · 340 N·m+9% 7095 (A)
Transmission
Top speed declared15.5 mph · 25 km/h15.5 mph · 25 km/h—
Hydraulics & hitch
Pump flow declared—12.7 gpm · 48.0 L/min—
Rear PTO speeds declared540 rpm / 1000 rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared8,378 lb · 3,800 kg8,664 lb · 3,930 kg—
Wheelbase declared100.4 in · 2,550 mm107.3 in · 2,725 mm+7% R-1056 (DT)
Length declared177.2 in · 4,500 mm178.0 in · 4,520 mm—
Width declared78.7 in · 2,000 mm88.6–104.3 in · 2,250–2,650 mmdiffers
Ground clearance declared21.3 in · 540 mm21.3 in · 540 mm—
Fuel tank declared—126.8 qt · 120.0 L—

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Ford 7095 (A) sources

Source
  • Source: Traktorenlexikon, “Ford 7095”
  • Source: Traktorenlexikon, “Ford 8100”

Lamborghini R-1056 (DT) sources

Source
  • Source: Traktorenlexikon, “Lamborghini 1056 DT”