WhichTractor
  • Rigid chassis
  • WhichTractor size: Compact
  • No lab test on file
  • 1981–1983

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Ford 2610 specs: hp, weight, years

The manufacturer claimed 40.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

40.5 hp

30.2 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Ford 2610”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
3,977 lb
3-point lift
3,115 lb
Hyd. flow
5.8 gpm
Top speed
18.0 mph

Ford 2610 specs: key facts

  • The Ford 2610 was built from 1981 to 1983.

  • The Ford 2610 has a claimed engine power (gross or net not stated) of 30.2 kW (40.5 hp); it has no measured PTO figure.

  • The Ford 2610 is two-wheel drive (2WD).

  • The Ford 2610 weighs 1,804 kg (3,977 lb) unladen.

  • The Ford 2610 has a rear PTO running at 540 rpm.

  • The three-point hitch of the Ford 2610 lifts 1,413 kg (3,115 lb) at the lower-link ends.

  • The hydraulic pump of the Ford 2610 delivers 21.8 L/min (5.8 gpm).

Source · Traktorenlexikon, “Ford 2610”

Illustration of the 1981–1983 Ford 2610, a 40 hp farm tractor, cab was optional — shown without it, a drawing generated from its specification record
Illustration — not a photograph · cab was optional — shown without it

How much horsepower does a 2610 have?

The only figure for the 2610 is 40.5 hp (30.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
40.5 hp

Source · Traktorenlexikon, “Ford 2610”

How much will a 2610 lift, and what is its hydraulic flow?

A 2610 lifts 3,115 lb (1,413 kg) at the lower-link ends of its Category 1 three-point hitch.

Hydraulics & PTO — 2610 hydraulics and PTO specifications
Pump flow5.8 gpm · 21.8 L/min
Hitch categoryCategory 1
Lift at ends3,115 lb · 1,413 kg
Rear PTO540 rpm @ 1,809 engine rpm
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Ford 2610”

What transmission does a 2610 have?

Transmission specifications for the 2610 are below.

Transmission — 2610 transmission specifications
ClutchPedal-operated, dry Borg & Beck double clutch
SteeringMechanically operated recirculating ball steering
Top speed18.0 mph · 29 km/h

Source · Traktorenlexikon, “Ford 2610”

How much does a 2610 weigh?

A 2610 weighs 3,977 lb (1,804 kg) unladen.

Weights & dimensions — 2610 weights and dimensions
Unladen weight3,977 lb · 1,804 kg
Wheelbase75.8 in · 1,925 mm
Length128.0 in · 3,250 mm
Width64.6–88.6 in · 1,640–2,250 mm
Height82.7 in · 2,100 mm
Ground clearance9.7 in · 247 mm
Front track48.4–80.6 in · 1,230–2,046 mm
Rear track52.7–76.8 in · 1,338–1,950 mm
Turning radius, braked10.1 ft · 3.07 m

Source · Traktorenlexikon, “Ford 2610”

What oil does a 2610 take, and how much?

A 2610 engine takes 7.0 qt (6.6 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

2610 fluid capacities, grades and service intervals
SystemCapacity
Engine oil7.0 qt · 6.6 LSource: Traktorenlexikon, “Ford 2610” · single source, not independently verified
Transmission9.9 qt · 9.4 LSource: Traktorenlexikon, “Ford 2610” · single source, not independently verified
Hydraulic24.6 qt · 23.3 LSource: Traktorenlexikon, “Ford 2610” · single source, not independently verified
Cooling system11.0 qt · 10.4 LSource: Traktorenlexikon, “Ford 2610” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 2610?

Within 10% of its 40.5 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Ford 2610

Is a 2610 two-wheel drive or four-wheel drive?

The Ford 2610 is two-wheel drive (2WD).

What PTO does a 2610 have?

A 2610 has a 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Ford 2610”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Ford 2610 — CC BY-SA 4.0, WIKIBOOKS-TL-90981 · revision 1007546. Wikibooks contributors (Traktorenlexikon). Original document