Ford 2610 vs John Deere 930

10 material differences · fewer than 12

Tractor one

1981–1983

No measured PTO figure

Tractor two

1974–1977

No measured PTO figure

Which should you choose?

Read our verdict on the 2610 and the 930 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Ford 2610 and John Deere 930, field by field
Field	2610	930	Gap
Engine
Engine power, claimed claimed	40.5 hp	40.5 hp	—
Engine declared	—	John Deere 3.164 DL 15	—
Displacement declared	—	2.70 L	—
Maximum torque declared	113 lb·ft · 153.5 N·m	107 lb·ft · 145 N·m	+6% 2610
Transmission
Top speed declared	18.0 mph · 29 km/h	16.8–18.6 mph · 27–30 km/h	differs
Clutch declared	Pedal-operated, dry Borg & Beck double clutch	Pedal operated, two-stage dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	5.8 gpm · 21.8 L/min	6.7 gpm · 25.4 L/min	+17% 930
Pressure declared	—	3,481–4,496 psi · 240–310 bar	—
Three-point lift at ends declared	3,115 lb · 1,413 kg	3,490 lb · 1,583 kg	+12% 930
Rear PTO speeds declared	540 rpm	—	—
Weight & dimensions
Unladen weight declared	3,977 lb · 1,804 kg	4,817 lb · 2,185 kg	+21% 930
Maximum permissible mass declared	—	7,055 lb · 3,200 kg	—
Wheelbase declared	75.8 in · 1,925 mm	74.4 in · 1,890 mm	—
Length declared	128.0 in · 3,250 mm	136.2 in · 3,460 mm	+6% 930
Width declared	64.6 in · 1,640 mm	66.5 in · 1,690 mm	—
Height declared	82.7 in · 2,100 mm	89.8 in · 2,280 mm	+9% 930
Ground clearance declared	9.7 in · 247 mm	12.8 in · 325 mm	+32% 930
Turning radius, braked declared	10.1 ft · 3.07 m	9.6 ft · 2.92 m	—
Fuel tank declared	52.0 qt · 49.2 L	66.0 qt · 62.5 L	+27% 930

Source

Source