10 material differences · fewer than 12

Tractor oneFord 26101981–1983No measured PTO figureTractor twoSOMECA 420 (TD)1978–1985No measured PTO figure

Which should you choose?

Read our verdict on the 2610 and the 420 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Ford 2610 and SOMECA 420 (TD), field by field
Field	2610	420 (TD)	Gap
Engine
Engine power, claimed claimed	40.5 hp	41.4 hp	—
Engine declared	—	FIAT-IVECO 8035.01.308	—
Displacement declared	—	2.34 L	—
Maximum torque declared	113 lb·ft · 153.5 N·m	107 lb·ft · 145 N·m	+6% 2610
Transmission
Top speed declared	18.0 mph · 29 km/h	15.5 mph · 25 km/h	+16% 2610
Clutch declared	Pedal-operated, dry Borg & Beck double clutch	—	—
Hydraulics & hitch
Pump flow declared	5.8 gpm · 21.8 L/min	4.5 gpm · 17.0 L/min	+28% 2610
Pressure declared	—	2,843 psi · 196 bar	—
Three-point lift, at the coupling points declared	3,115 lb · 1,413 kg	2,425 lb · 1,100 kg	+28% 2610
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,977 lb · 1,804 kg	3,638 lb · 1,650 kg	+9% 2610
Wheelbase declared	75.8 in · 1,925 mm	74.8 in · 1,900 mm	—
Length declared	128.0 in · 3,250 mm	113.4 in · 2,880 mm	+13% 2610
Width declared	64.6–88.6 in · 1,640–2,250 mm	65.2–81.1 in · 1,657–2,059 mm	differs
Height, over the safety frame declared	82.7 in · 2,100 mm	89.8 in · 2,280 mm	+9% 420 (TD)
Ground clearance declared	9.7 in · 247 mm	17.7 in · 450 mm	+82% 420 (TD)
Turning radius, braked declared	10.1 ft · 3.07 m	9.7 ft · 2.95 m	—
Fuel tank declared	52.0 qt · 49.2 L	38.0 qt · 36.0 L	+37% 2610

Source

Source