- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 1983–1986
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Ford 1510 (A) Full specifications
ISHIKAWAJIMA-SHIBAURA K-773 three-cylinder diesel. The manufacturer claimed 21.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
21.7 hp
16.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 1510”, claimed
- Weight
- 2,284 lb
- 3-point lift
- 1,433 lb
- Hyd. flow
- 6.6 gpm
- Top speed
- 12.4 mph
Ford 1510 (A) specs: key facts
The Ford 1510 (A) was built from 1983 to 1986.
The Ford 1510 (A) has a claimed engine power (gross or net not stated) of 16.2 kW (21.7 hp); it has no measured PTO figure.
The Ford 1510 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Ford 1510 (A) has a ISHIKAWAJIMA-SHIBAURA K-773 engine, a 3-cylinder 1.12 L diesel unit.
The Ford 1510 (A) weighs 1,036 kg (2,284 lb) unladen.
The Ford 1510 (A) has a rear PTO running at 540 rpm.
The three-point hitch of the Ford 1510 (A) lifts 650 kg (1,433 lb) at the lower-link ends.
The hydraulic pump of the Ford 1510 (A) delivers 25.0 L/min (6.6 gpm).
Source · Traktorenlexikon, “Ford 1510”
How much horsepower does a 1510 (A) have?
The only figure for the 1510 (A) is 21.7 hp (16.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Ford 1510”
What engine is in a 1510 (A)?
A 1510 (A) has an ISHIKAWAJIMA-SHIBAURA K-773, a 3-cylinder 1.12 L diesel engine.
| Make & model | ISHIKAWAJIMA-SHIBAURA K-773 |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 68.2 ci · 1.12 L |
| Max torque | 43 lb·ft · 58 N·m @ 1,600 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Ford 1510”
How much will a 1510 (A) lift, and what is its hydraulic flow?
A 1510 (A) lifts 1,433 lb (650 kg) at the lower-link ends of its Category 1 three-point hitch.
| Pump flow | 6.6 gpm · 25.0 L/min |
|---|---|
| Hitch category | Category 1 |
| Lift at ends | 1,433 lb · 650 kg |
| Rear PTO | 540 rpm @ 2,464 engine rpm |
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Ford 1510”
What transmission does a 1510 (A) have?
Transmission specifications for the 1510 (A) are below.
| Steering | Mechanical steering |
|---|---|
| Top speed | 12.4 mph · 20 km/h |
Source · Traktorenlexikon, “Ford 1510”
How much does a 1510 (A) weigh?
A 1510 (A) weighs 2,284 lb (1,036 kg) unladen.
| Unladen weight | 2,284 lb · 1,036 kg |
|---|---|
| Wheelbase | 63.0 in · 1,600 mm |
| Length | 111.4 in · 2,830 mm |
| Width | 50.0 in · 1,270 mmtwo-wheel-drive version |
| Height | 85.8 in · 2,180 mm |
| Ground clearance | 13.0 in · 330 mmtwo-wheel-drive version |
| Front track | 39.4–52.0 in · 1,000–1,320 mmtwo-wheel-drive version |
| Rear track | 41.3–47.2 in · 1,050–1,200 mm |
| Turning radius, braked | 7.7 ft · 2.35 m |
Source · Traktorenlexikon, “Ford 1510”
Which tractors compare with a 1510 (A)?
Within 10% of its 18.6 hp at the PTO (claimed), the same type, and first built within 15 years of it.
Everything else people ask
Is a 1510 (A) two-wheel drive or four-wheel drive?
The Ford 1510 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a 1510 (A) have?
A 1510 (A) has a 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Ford 1510”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 1510 — CC BY-SA 4.0, WIKIBOOKS-TL-110284 · revision 918446. Wikibooks contributors (Traktorenlexikon). Original document