9 material differences · fewer than 12
Tractor oneFord 1510 (A)1983–1986No measured PTO figureTractor twoHermann Lanz D 5271968–1973No measured PTO figure
Which should you choose?
Read our verdict on the 1510 (A) and the D 527 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 1510 (A) | D 527 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 21.7 hp | 23.6 hp | +9% D 527 |
| Engine declared | ISHIKAWAJIMA-SHIBAURA K-773 | MWM D 208-2 | differs |
| Displacement declared | 1.12 L | 1.49 L | +33% D 527 |
| Maximum torque declared | 43 lb·ft · 58 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4–15.5 mph · 20–25 km/h | differs |
| Clutch declared | — | Maintenance-free double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 6.6 gpm · 25.0 L/min | — | — |
| Rear PTO speeds declared | 540 rpm | 570/1100 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 2,284 lb · 1,036 kg | 3,704 lb · 1,680 kg | +62% D 527 |
| Wheelbase declared | 63.0 in · 1,600 mm | 76.0 in · 1,930 mm | +21% D 527 |
| Length declared | 111.4 in · 2,830 mm | 126.0 in · 3,200 mm | +13% D 527 |
| Width declared | 50.0 in · 1,270 mm | 59.8 in · 1,520 mm | +20% D 527 |
| Ground clearance declared | 13.0 in · 330 mm | 13.4 in · 340 mm | — |
| Turning radius, braked declared | 7.7 ft · 2.35 m | — | — |
| Fuel tank declared | 27.6 qt · 26.1 L | 37.0 qt · 35 L | +34% D 527 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 1510 (A) sources
- Source: Traktorenlexikon, “Ford 1510”
Hermann Lanz D 527 sources
- Source: Traktorenlexikon, “HELA D527”