7 material differences · fewer than 12
Tractor oneFord 1510 (A)1983–1986No measured PTO figureTractor twoFord 1520 (A)1987–1998No measured PTO figure
Which should you choose?
Read our verdict on the 1510 (A) and the 1520 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 1510 (A) | 1520 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 21.7 hp | 23.7 hp | +9% 1520 (A) |
| Engine declared | ISHIKAWAJIMA-SHIBAURA K-773 | ISHIKAWAJIMA-SHIBAURA J-843 | differs |
| Displacement declared | 1.12 L | 1.33 L | +19% 1520 (A) |
| Maximum torque declared | 43 lb·ft · 58 N·m | 53 lb·ft · 72.3 N·m | +25% 1520 (A) |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 12.4 mph · 20 km/h | — |
| Clutch declared | — | Pedal operated dry DAIKIN double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 6.6 gpm · 25.0 L/min | 7.2 gpm · 27.3 L/min | +9% 1520 (A) |
| Pressure declared | — | 1,421 psi · 98 bar | — |
| Three-point lift, at the coupling points declared | 1,433 lb · 650 kg | 1,929 lb · 875 kg | +35% 1520 (A) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,284 lb · 1,036 kg | 2,174 lb · 986 kg | — |
| Wheelbase declared | 63.0 in · 1,600 mm | 63.0 in · 1,600 mm | — |
| Length declared | 111.4 in · 2,830 mm | 111.4 in · 2,829 mm | — |
| Width declared | 50.0 in · 1,270 mm | 48.3–62.1 in · 1,227–1,577 mm | differs |
| Ground clearance declared | 13.0 in · 330 mm | 11.7 in · 298 mm | +11% 1510 (A) |
| Turning radius, braked declared | 7.7 ft · 2.35 m | — | — |
| Fuel tank declared | 27.6 qt · 26.1 L | 28.5 qt · 27.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 1510 (A) sources
- Source: Traktorenlexikon, “Ford 1510”
Ford 1520 (A) sources
- Source: Traktorenlexikon, “Ford 1520”