Fiat 300 (DT) vs Güldner A 3 KTA (Burgund-T)

11 material differences · fewer than 12

Tractor one

1971–1978

No measured PTO figure

Tractor two

1962–1965

No measured PTO figure

Which should you choose?

Read our verdict on the 300 (DT) and the A 3 KTA (Burgund-T) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 300 (DT) and Güldner A 3 KTA (Burgund-T), field by field
Field	300 (DT)	A 3 KTA (Burgund-T)	Gap
Engine
Engine power, claimed claimed	30.6 hp	24.5 hp	+25% 300 (DT)
Engine declared	FIAT-IVECO 8025.01.200 or 300	Güldner 3 LKA	differs
Displacement declared	1.73 L	1.32 L	+31% 300 (DT)
Maximum torque declared	71 lb·ft · 96 N·m	59 lb·ft · 79 N·m	+22% 300 (DT)
Transmission
Top speed declared	15.5 mph · 25 km/h	12.2 mph · 19.7 km/h	+27% 300 (DT)
Clutch declared	Pedal-operated dry FIAT single-plate clutch	Pedal operated dry double clutch by Fichtel & Sachs	differs
Hydraulics & hitch
Pump flow declared	2.5 gpm · 9.3 L/min	—	—
Pressure declared	—	2,134 psi · 147 bar	—
Three-point lift at ends declared	1,433 lb · 650 kg	1,984 lb · 900 kg	+38% A 3 KTA (Burgund-T)
Rear PTO speeds declared	540 rpm	546 rpm	differs
Weight & dimensions
Unladen weight declared	2,690 lb · 1,220 kg	3,197 lb · 1,450 kg	+19% A 3 KTA (Burgund-T)
Wheelbase declared	66.9 in · 1,700 mm	78.7 in · 2,000 mm	+18% A 3 KTA (Burgund-T)
Length declared	107.9 in · 2,740 mm	133.1 in · 3,380 mm	+23% A 3 KTA (Burgund-T)
Width declared	60.6 in · 1,540 mm	59.8 in · 1,520 mm	—
Height declared	61.8 in · 1,570 mm	61.8 in · 1,570 mm	—
Ground clearance declared	18.5 in · 470 mm	—	—
Turning radius, braked declared	9.5 ft · 2.89 m	9.2 ft · 2.80 m	—
Fuel tank declared	30.6 qt · 29.0 L	33.8 qt · 32 L	+10% A 3 KTA (Burgund-T)

Source

Source