11 material differences · fewer than 12

Tractor oneFiat 300 (DT)1971–1978No measured PTO figureTractor twoKramer KWD 2501958–1959No measured PTO figure

Which should you choose?

Read our verdict on the 300 (DT) and the KWD 250 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 300 (DT) and Kramer KWD 250, field by field
Field	300 (DT)	KWD 250	Gap
Engine
Engine power, claimed claimed	30.6 hp	24 hp	+27% 300 (DT)
Engine declared	FIAT-IVECO 8025.01.200 or 300	Güldner 2 BS	differs
Displacement declared	1.73 L	1.84 L	+7% KWD 250
Maximum torque declared	71 lb·ft · 96 N·m	72 lb·ft · 98 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	12.3 mph · 19.8 km/h	+26% 300 (DT)
Clutch declared	Pedal-operated dry FIAT single-plate clutch	Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Pump flow declared	2.5 gpm · 9.3 L/min	4.2 gpm · 16.0 L/min	+72% KWD 250
Pressure declared	—	1,707 psi · 118 bar	—
Rear PTO speeds declared	540 rpm	528 rpm	differs
Weight & dimensions
Unladen weight declared	2,690 lb · 1,220 kg	3,417 lb · 1,550 kg	+27% KWD 250
Maximum permissible mass declared	—	3,968 lb · 1,800 kg	—
Wheelbase declared	66.9 in · 1,700 mm	74.3 in · 1,887 mm	+11% KWD 250
Length declared	107.9 in · 2,740 mm	116.1 in · 2,950 mm	+8% KWD 250
Width declared	60.6 in · 1,540 mm	62.2 in · 1,580 mm	—
Height, over the steering wheel declared	61.8 in · 1,570 mm	61.8 in · 1,570 mm	—
Ground clearance declared	18.5 in · 470 mm	15.0 in · 380 mm	+24% 300 (DT)
Turning radius, braked declared	9.5 ft · 2.89 m	—	—
Fuel tank declared	30.6 qt · 29.0 L	38.0 qt · 36 L	+24% KWD 250

Source

Source