6 material differences · fewer than 12
Tractor oneFendt Vario 209 V/F/Pfrom 2009No measured PTO figureTractor twoFendt 208 PA2002–2009No measured PTO figure
Which should you choose?
Read our verdict on the Vario 209 V/F/P and the 208 PA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Vario 209 V/F/P | 208 PA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 79 hp | 79 hp | — |
| Maximum torque declared | 275 lb·ft · 373 N·m | 234 lb·ft · 317 N·m | +18% Vario 209 V/F/P |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | — | Dry multi-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 28.0 gpm · 106.0 L/min | 19.5 gpm · 74.0 L/min | +43% Vario 209 V/F/P |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/750/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,129–6,790 lb · 2,780–3,080 kg | 6,404 lb · 2,905 kg | differs |
| Maximum permissible mass declared | — | 11,023 lb · 5,000 kg | — |
| Wheelbase declared | 85.0 in · 2,160 mm | 87.4 in · 2,221 mm | — |
| Length declared | 140.9–145.7 in · 3,578–3,701 mm | 144.3 in · 3,665 mm | — |
| Width declared | 45.3–66.1 in · 1,151–1,679 mm | 65.6 in · 1,666 mm | differs |
| Ground clearance declared | — | 15.6 in · 395 mm | — |
| Fuel tank declared | 80.3 qt · 76 L | 74.0 qt · 70 L | +9% Vario 209 V/F/P |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Vario 209 V/F/P sources
- Source: Traktorenlexikon, “Fendt 209 V/F/P”
Fendt 208 PA sources
- Source: Traktorenlexikon, “Fendt Farmer 208 PA”