4 material differences · fewer than 12
Tractor oneFendt 208 FA2002–2009No measured PTO figureTractor twoFendt 208 PA2002–2009No measured PTO figure
Which should you choose?
Read our verdict on the 208 FA and the 208 PA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
4 material differences · 10 fields identical or within 5%, which is not counted as material
| Field | 208 FA | 208 PA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 79 hp | 79 hp | — |
| Maximum torque declared | 234 lb·ft · 317 N·m | 234 lb·ft · 317 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9 mph · 40 km/h | — |
| Clutch declared | dry multi-plate clutch | Dry multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | Load sensing | — |
| Pump flow declared | 19.5 gpm · 74.0 L/min | 19.5 gpm · 74.0 L/min | — |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/750/1000 rpm | 540/750/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,085 lb · 2,760 kg | 6,404 lb · 2,905 kg | — |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | 11,023 lb · 5,000 kg | +25% 208 PA |
| Wheelbase declared | 86.1 in · 2,187 mm | 87.4 in · 2,221 mm | — |
| Length declared | 139.5 in · 3,544 mm | 144.3 in · 3,665 mm | — |
| Width declared | 54.0 in · 1,372 mm | 65.6 in · 1,666 mm | +21% 208 PA |
| Ground clearance declared | 8.7 in · 220 mm | 15.6 in · 395 mm | +80% 208 PA |
| Fuel tank declared | 74.0 qt · 70 L | 74.0 qt · 70 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt 208 FA sources
- Source: Traktorenlexikon, “Fendt Farmer 208 FA”
Fendt 208 PA sources
- Source: Traktorenlexikon, “Fendt Farmer 208 PA”