• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1953–1955
  • 918 built

WhichTractor size, not the maker’s category

The source says so, in a sentence about this machine. How we decide what a machine is

Fahr D 17 NH Full specifications

Güldner 2 DN two-cylinder diesel. The manufacturer claimed 16.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

16.8 hp

12.5 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fahr D 17 NH”, claimed

Weight
2,932 lb
Top speed
12.4 mph

Fahr D 17 NH specs: key facts

  • The Fahr D 17 NH was built from 1953 to 1955.

  • The Fahr D 17 NH has a claimed engine power (gross or net not stated) of 12.5 kW (16.8 hp); it has no measured PTO figure.

  • The Fahr D 17 NH is two-wheel drive (2WD).

  • The Fahr D 17 NH has a Güldner 2 DN engine, a 2-cylinder 1.30 L diesel unit.Source 2

  • The Fahr D 17 NH weighs 1,330 kg (2,932 lb) unladen.

  • The Fahr D 17 NH has a rear PTO running at 540 rpm.

Source · Traktorenlexikon, “Fahr D 17 NH”

How much horsepower does a D 17 NH have?

The only figure for the D 17 NH is 16.8 hp (12.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
16.8 hp

Source · Traktorenlexikon, “Fahr D 17 NH”

What engine is in a D 17 NH?

A D 17 NH has a Güldner 2 DN, a 2-cylinder 1.30 L diesel engine.

Engine — D 17 NH engine specifications
Make & modelGüldner 2 DNSource 2
Cylinders2, liquid-cooledSource 2
Displacement79.6 ci · 1.30 LSource 2
Max torque51 lb·ft · 69 N·m @ 1,610 rpm
Electrical system12 V

Source · Traktorenlexikon, “Fahr D 17 NH”

How much will a D 17 NH lift?

Hydraulic and PTO specifications for the D 17 NH are below.

Hydraulics & PTO — D 17 NH hydraulics and PTO specifications
Pressure3,129 psi · 216 bar
Rear PTO540 rpm
PTO shaft29 x 34,9 x 8,7 mm

Source · Traktorenlexikon, “Fahr D 17 NH”

What transmission does a D 17 NH have?

Transmission specifications for the D 17 NH are below.

Transmission — D 17 NH transmission specifications
ClutchPedal operated dry Fichtel & Sachs single disc clutch
SteeringZF steering with individual wheel steering
Top speed12.4 mph · 20 km/h

Source · Traktorenlexikon, “Fahr D 17 NH”

How much does a D 17 NH weigh?

A D 17 NH weighs 2,932 lb (1,330 kg) unladen.

Weights & dimensions — D 17 NH weights and dimensions
Unladen weight2,932 lb · 1,330 kg
Maximum permissible mass4,409 lb · 2,000 kg
Maximum front axle load1,653 lb · 750 kg
Maximum rear axle load2,646 lb · 1,200 kg
Wheelbase64.6 in · 1,640 mm
Length104.3 in · 2,650 mm
Width61.5 in · 1,562 mm
Height62.0 in · 1,576 mm
Ground clearance20.1 in · 510 mm
Front track49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles
Rear track49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles
Turning radius, braked8.0 ft · 2.45 m

Source · Traktorenlexikon, “Fahr D 17 NH”

Which tractors compare with a D 17 NH?

Within 10% of its 17 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a D 17 NH two-wheel drive or four-wheel drive?

The Fahr D 17 NH is two-wheel drive (2WD).

What PTO does a D 17 NH have?

A D 17 NH has a 540 rpm rear PTO on a 29 x 34,9 x 8,7 mm shaft.

Where this page comes from

Compiled from Traktorenlexikon, “MAN AS 718 A”; and Traktorenlexikon, “Fahr D 17 NH”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fahr D 17 NHCC BY-SA 4.0, WIKIBOOKS-TL-49061 · revision 990476. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: MAN AS 718 ACC BY-SA 4.0, WIKIBOOKS-TL-46600 · revision 1004306. Wikibooks contributors (Traktorenlexikon). Original document