• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1969–1970
  • 220 built

It sits on the utility/standard-size boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Eicher Mammut 3012 A Full specifications

The manufacturer claimed 60.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

60.9 hp

45.4 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Eicher 3012 Mammut A”, claimed

Weight
6,923 lb
Hyd. flow
10.6 gpm
Top speed
12.4 mph

Eicher Mammut 3012 A specs: key facts

  • The Eicher Mammut 3012 A was built from 1969 to 1970.

  • The Eicher Mammut 3012 A has a claimed engine power (gross or net not stated) of 45.4 kW (60.9 hp); it has no measured PTO figure.

  • The Eicher Mammut 3012 A is four-wheel drive (4WD).

  • The Eicher Mammut 3012 A weighs 3,140 kg (6,923 lb) unladen.

  • The Eicher Mammut 3012 A has an independent rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the Eicher Mammut 3012 A delivers 40.0 L/min (10.6 gpm).

Source · Traktorenlexikon, “Eicher 3012 Mammut A”

How much horsepower does a Mammut 3012 A have?

The only figure for the Mammut 3012 A is 60.9 hp (45.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
60.9 hp

Source · Traktorenlexikon, “Eicher 3012 Mammut A”

How much will a Mammut 3012 A lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the Mammut 3012 A are below.

Hydraulics & PTO — Mammut 3012 A hydraulics and PTO specifications
Pump flow10.6 gpm · 40.0 L/min
Pressure2,134 psi · 147 bar
Rear PTOIndependent, engine-driven, 540/1000 rpmEngages under load
PTO shaftProfile Form A

Source · Traktorenlexikon, “Eicher 3012 Mammut A”

What transmission does a Mammut 3012 A have?

Transmission specifications for the Mammut 3012 A are below.

Transmission — Mammut 3012 A transmission specifications
ClutchEicher dual clutch
SteeringZF hydrostatic steering
Top speed12.4 mph · 20 km/hSchnellgang 28

Source · Traktorenlexikon, “Eicher 3012 Mammut A”

How much does a Mammut 3012 A weigh?

A Mammut 3012 A weighs 6,923 lb (3,140 kg) unladen.

Weights & dimensions — Mammut 3012 A weights and dimensions
Unladen weight6,923 lb · 3,140 kg
Wheelbase89.6 in · 2,277 mm
Length139.8 in · 3,550 mm
Width74.8 in · 1,900 mm
Height66.1 in · 1,680 mm
Ground clearance11.0 in · 280 mm
Front track59.1 in · 1,500 mm
Rear track59.1–61.4 in · 1,500–1,560 mm
Turning radius, braked13.9 ft · 4.25 m

Source · Traktorenlexikon, “Eicher 3012 Mammut A”

Which tractors compare with a Mammut 3012 A?

Within 10% of its 60.9 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a Mammut 3012 A two-wheel drive or four-wheel drive?

The Eicher Mammut 3012 A is four-wheel drive (4WD).

What PTO does a Mammut 3012 A have?

A Mammut 3012 A has a independent 540/1000 rpm rear PTO on a Profile Form A shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Eicher 3012 Mammut A”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Eicher 3012 Mammut ACC BY-SA 4.0, WIKIBOOKS-TL-82271 · revision 1016400. Wikibooks contributors (Traktorenlexikon). Original document