5 material differences · fewer than 12
Tractor oneEicher Mammut 3012 A1969–1970No measured PTO figureTractor twoEicher Mammut 3020 HR A1970–1972No measured PTO figure
Which should you choose?
Read our verdict on the Mammut 3012 A and the Mammut 3020 HR A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | Mammut 3012 A | Mammut 3020 HR A | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 60.9 hp | 60.9 hp | — |
| Engine declared | — | Eicher EDK 4 | — |
| Displacement declared | — | 3.93 L | — |
| Maximum torque declared | 183 lb·ft · 248 N·m | 183 lb·ft · 248 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 15.5 mph · 25 km/h | +25% Mammut 3020 HR A |
| Clutch declared | Eicher dual clutch | Foot-operated single-plate dry clutch in flywheel housing as PTO clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.6 gpm · 40.0 L/min | 10.3 gpm · 39 L/min | — |
| Pressure declared | 2,134 psi · 147 bar | 2,489 psi · 172 bar | +17% Mammut 3020 HR A |
| Rear PTO speeds declared | 540/1000 rpm | 590/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,923 lb · 3,140 kg | 6,757 lb · 3,065 kg | — |
| Maximum permissible mass declared | — | 9,480 lb · 4,300 kg | — |
| Wheelbase declared | 89.6 in · 2,277 mm | — | — |
| Length declared | 139.8 in · 3,550 mm | 141.7 in · 3,600 mm | — |
| Width declared | 74.8 in · 1,900 mm | 77.6 in · 1,970 mm | — |
| Ground clearance declared | 11.0 in · 280 mm | 11.0 in · 280 mm | — |
| Turning radius, braked declared | 13.9 ft · 4.25 m | 15.7 ft · 4.80 m | +13% Mammut 3020 HR A |
| Fuel tank declared | 100.4 qt · 95 L | 100.4 qt · 95 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Eicher Mammut 3012 A sources
- Source: Traktorenlexikon, “Eicher 3012 Mammut A”
Eicher Mammut 3020 HR A sources
- Source: Traktorenlexikon, “Eicher 3020 Mammut HR A”
- Source: Traktorenlexikon, “Eicher 3019 Mammut HR”