• Rigid chassis
  • WhichTractor size: Compact
  • Not independently tested
  • 1968–1974
  • 1,668 built

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Deutz D 2506 Full specifications

KHD F2L 912 two-cylinder diesel. The manufacturer claimed 21 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

21 hp

16 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Deutz D 2506”, claimed

Weight
3,770 lb
Hyd. flow
6.5 gpm
Top speed
12.4–15.5 mph

Deutz D 2506 specs: key facts

  • The Deutz D 2506 was built from 1968 to 1974.

  • The Deutz D 2506 has a claimed engine power (gross or net not stated) of 16 kW (21 hp); it has no measured PTO figure.

  • The Deutz D 2506 is two-wheel drive (2WD).

  • The Deutz D 2506 has a KHD F2L 912 engine, a 2-cylinder 1.88 L diesel unit.

  • The Deutz D 2506 weighs 1,710 kg (3,770 lb) unladen.

  • The Deutz D 2506 has a dependent rear PTO running at 540 rpm.

  • The hydraulic pump of the Deutz D 2506 delivers 24.5 L/min (6.5 gpm).

Source · Traktorenlexikon, “Deutz D 2506”

How much horsepower does a D 2506 have?

The only figure for the D 2506 is 21 hp (16 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
21 hp

Source · Traktorenlexikon, “Deutz D 2506”

What engine is in a D 2506?

A D 2506 has a KHD F2L 912, a 2-cylinder 1.88 L diesel engine.

Engine — D 2506 engine specifications
Make & modelKHD F2L 912
Cylinders2, air-cooled
Displacement115.0 ci · 1.88 L
Max torque67 lb·ft · 91 N·m @ 1,553 rpm

Source · Traktorenlexikon, “Deutz D 2506”

How much will a D 2506 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the D 2506 are below.

Hydraulics & PTO — D 2506 hydraulics and PTO specifications
Pump flow6.5 gpm · 24.5 L/min
Pressure2,538 psi · 175 bar
Hitch categoryCategory 1
Rear PTODependent, transmission-driven, 540 rpm @ 1,879 engine rpm
PTO shaft29 x 34,9 x 8,7 mm

Source · Traktorenlexikon, “Deutz D 2506”

What transmission does a D 2506 have?

Transmission specifications for the D 2506 are below.

Transmission — D 2506 transmission specifications
ClutchPedal operated dry Fichtel & Sachs single disc clutch
SteeringMechanical ZF Gemmer steering
Top speed12.4–15.5 mph · 20–25 km/hthe article lists alternatives

Source · Traktorenlexikon, “Deutz D 2506”

How much does a D 2506 weigh?

A D 2506 weighs 3,770 lb (1,710 kg) unladen.

Weights & dimensions — D 2506 weights and dimensions
Unladen weight3,770 lb · 1,710 kg
Maximum permissible mass6,173 lb · 2,800 kg
Maximum front axle load2,050 lb · 930 kg
Maximum rear axle load4,255 lb · 1,930 kg
Wheelbase73.4 in · 1,865 mm
Length131.5 in · 3,340 mm
Width63.0 in · 1,600 mm
Height63.0 in · 1,600 mm
Ground clearance16.1 in · 410 mm
Front track49.6–55.9 in · 1,260–1,420 mmthe article lists alternatives
Rear track49.2–59.4 in · 1,250–1,510 mmthe article lists alternatives
Turning radius, braked10.3 ft · 3.15 m

Source · Traktorenlexikon, “Deutz D 2506”

Which tractors compare with a D 2506?

Within 10% of its 22.1 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a D 2506 two-wheel drive or four-wheel drive?

The Deutz D 2506 is two-wheel drive (2WD).

What PTO does a D 2506 have?

A D 2506 has a dependent 540 rpm rear PTO on a 29 x 34,9 x 8,7 mm shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Deutz D 2506”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz D 2506CC BY-SA 4.0, WIKIBOOKS-TL-51745 · revision 1023761. Wikibooks contributors (Traktorenlexikon). Original document