• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1982–1983

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Deutz-Fahr DX 92 Full specifications

KHD BF4L 913 four-cylinder diesel. The manufacturer claimed 89 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

89 hp

66 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Deutz-Fahr DX 92”, claimed

Weight
8,477 lb
3-point lift
8,378 lb
Hyd. flow
12.8 gpm
Top speed
18.6–24.9 mph

Deutz-Fahr DX 92 specs: key facts

  • The Deutz-Fahr DX 92 was built from 1982 to 1983.

  • The Deutz-Fahr DX 92 has a claimed engine power (gross or net not stated) of 66 kW (89 hp); it has no measured PTO figure.

  • The Deutz-Fahr DX 92 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

  • The Deutz-Fahr DX 92 has a KHD BF4L 913 engine, a 4-cylinder 4.09 L diesel unit.Source 1

  • The Deutz-Fahr DX 92 weighs 3,845 kg (8,477 lb) unladen.

  • The Deutz-Fahr DX 92 has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Deutz-Fahr DX 92 lifts 3,800 kg (8,378 lb) at the lower-link ends.

  • The hydraulic pump of the Deutz-Fahr DX 92 delivers 48.6 L/min (12.8 gpm).

Source · Traktorenlexikon, “Deutz-Fahr DX 92”

How much horsepower does a DX 92 have?

The only figure for the DX 92 is 89 hp (66 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
89 hp

Source · Traktorenlexikon, “Deutz-Fahr DX 92”

What engine is in a DX 92?

A DX 92 has a KHD BF4L 913, a 4-cylinder 4.09 L diesel engine.

Engine — DX 92 engine specifications
Make & modelKHD BF4L 913
Cylinders4, air-cooledSource 2
Displacement249.3 ci · 4.09 L
Max torque235 lb·ft · 318 N·m @ 1,701 rpmSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”

How much will a DX 92 lift, and what is its hydraulic flow?

A DX 92 lifts 8,378 lb (3,800 kg) at the lower-link ends.

Hydraulics & PTO — DX 92 hydraulics and PTO specifications
SystemOpen centre
Pump flow12.8 gpm · 48.6 L/min
Pressure3,481 psi · 240 bar
Lift at ends8,378 lb · 3,800 kg
Rear PTOIndependent, 540/1000 rpm @ 2,025 engine rpmEngages under load
PTO shaft1 3/8"-6 splines (Form-A)

Source · Traktorenlexikon, “Deutz-Fahr DX 92”

What transmission does a DX 92 have?

Transmission specifications for the DX 92 are below.

Transmission — DX 92 transmission specifications
ClutchIndependent dry double clutch
BrakesPedal operated hydraulic caliper disc brakes
SteeringHydrostatic steering
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Deutz-Fahr DX 92”

How much does a DX 92 weigh?

A DX 92 weighs 8,477 lb (3,845 kg) unladen.

Weights & dimensions — DX 92 weights and dimensions
Unladen weight8,477 lb · 3,845 kgtwo-wheel-drive version
Maximum permissible mass13,669 lb · 6,200 kg
Maximum front axle load4,255 lb · 1,930 kg
Maximum rear axle load9,480 lb · 4,300 kg
Wheelbase91.7 in · 2,330 mmtwo-wheel-drive version
Length159.1 in · 4,040 mmtwo-wheel-drive version
Width90.7 in · 2,304 mm
Height106.3 in · 2,700 mm
Ground clearance23.2 in · 590 mmtwo-wheel-drive version
Front track59.4–83.0 in · 1,509–2,109 mmtwo-wheel-drive version
Rear track64.6 in · 1,640 mm

Source · Traktorenlexikon, “Deutz-Fahr DX 92”

Which tractors compare with a DX 92?

Within 10% of its 89 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a DX 92 two-wheel drive or four-wheel drive?

The Deutz-Fahr DX 92 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

What PTO does a DX 92 have?

A DX 92 has a independent 540/1000 rpm rear PTO on a 1 3/8"-6 splines (Form-A) shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Deutz-Fahr AgroStar 4.78”; and Traktorenlexikon, “Deutz-Fahr DX 92”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz-Fahr AgroStar 4.78CC BY-SA 4.0, WIKIBOOKS-TL-79387 · revision 1007751. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Deutz-Fahr DX 92CC BY-SA 4.0, WIKIBOOKS-TL-88180 · revision 1024140. Wikibooks contributors (Traktorenlexikon). Original document