Deutz-Fahr DX 92 vs International Harvester 955

11 material differences · fewer than 12

Tractor one

1982–1983

No measured PTO figure

Tractor two

1977–1982

No measured PTO figure

Which should you choose?

Read our verdict on the DX 92 and the 955 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 92 and International Harvester 955, field by field
Field	DX 92	955	Gap
Engine
Engine power, claimed claimed	89 hp	88.4 hp	—
Engine declared	KHD BF4L 913	IH D-310 (D-358)	differs
Displacement declared	4.09 L	5.07 L	+24% 955
Maximum torque declared	235 lb·ft · 318 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	Fichtel & Sachs dry double clutch, type DUT 310-310/310	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.8 gpm · 48.6 L/min	11.3 gpm · 42.6 L/min	+14% DX 92
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	9,535 lb · 4,325 kg	+14% 955
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,477 lb · 3,845 kg	9,017–10,108 lb · 4,090–4,585 kg	differs
Maximum permissible mass declared	13,669 lb · 6,200 kg	—	—
Wheelbase declared	91.7 in · 2,330 mm	102.0–103.5 in · 2,590–2,630 mm	differs
Length declared	159.1 in · 4,040 mm	165.1–166.5 in · 4,194–4,229 mm	—
Width declared	90.7 in · 2,304 mm	80.7 in · 2,049 mm	+12% DX 92
Height declared	106.3 in · 2,700 mm	109.1 in · 2,770 mm	—
Ground clearance declared	23.2 in · 590 mm	15.0–22.1 in · 382–562 mm	differs
Turning radius, braked declared	—	14.4–15.3 ft · 4.40–4.67 m	—
Fuel tank declared	126.8 qt · 120 L	147.9 qt · 140 L	+17% 955

Source

Source