• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1985–1987

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson MF 698 Turbo Full specifications

Perkins A 4.236 T. four-cylinder diesel. The manufacturer claimed 89 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

89 hp

66 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 698T”, claimed

Weight
8,422 lb
Hyd. flow
16.5 gpm
Top speed
19.9 mph

Massey Ferguson MF 698 Turbo specs: key facts

  • The Massey Ferguson MF 698 Turbo was built from 1985 to 1987.

  • The Massey Ferguson MF 698 Turbo has a claimed engine power (gross or net not stated) of 66 kW (89 hp); it has no measured PTO figure.

  • The Massey Ferguson MF 698 Turbo is four-wheel drive (4WD).

  • The Massey Ferguson MF 698 Turbo has a Perkins A 4.236 T. engine, a 4-cylinder 3.86 L diesel unit.

  • The Massey Ferguson MF 698 Turbo weighs 3,820 kg (8,422 lb) unladen.

  • The Massey Ferguson MF 698 Turbo has a rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the Massey Ferguson MF 698 Turbo delivers 62.5 L/min (16.5 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 698T”

How much horsepower does an MF 698 Turbo have?

The only figure for the MF 698 Turbo is 89 hp (66 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
89 hp

Source · Traktorenlexikon, “Massey Ferguson MF 698T”

What engine is in an MF 698 Turbo?

An MF 698 Turbo has a Perkins A 4.236 T., a 4-cylinder 3.86 L diesel engine.

Engine — MF 698 Turbo engine specifications
Make & modelPerkins A 4.236 T.
Cylinders4, liquid-cooled
Displacement235.6 ci · 3.86 L
Max torque245 lb·ft · 332 N·m @ 1,350 rpm

Source · Traktorenlexikon, “Massey Ferguson MF 698T”

How much will an MF 698 Turbo lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the MF 698 Turbo are below.

Hydraulics & PTO — MF 698 Turbo hydraulics and PTO specifications
SystemConstant flow
Pump flow16.5 gpm · 62.5 L/min
Hitch categoryCategory 2
Rear PTO540/1000 rpm

Source · Traktorenlexikon, “Massey Ferguson MF 698T”

What transmission does an MF 698 Turbo have?

Transmission specifications for the MF 698 Turbo are below.

Transmission — MF 698 Turbo transmission specifications
Clutchdry single-plate clutch
Brakeshydraulic wet multi-disc brake
Steeringhydrostatic steering
Top speed19.9 mph · 32 km/h

Source · Traktorenlexikon, “Massey Ferguson MF 698T”

How much does an MF 698 Turbo weigh?

An MF 698 Turbo weighs 8,422 lb (3,820 kg) unladen.

Weights & dimensions — MF 698 Turbo weights and dimensions
Unladen weight8,422 lb · 3,820 kg
Wheelbase101.6 in · 2,580 mm
Length161.0 in · 4,090 mm
Height107.5 in · 2,730 mm

Source · Traktorenlexikon, “Massey Ferguson MF 698T”

Which tractors compare with an MF 698 Turbo?

Within 10% of its 89 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is an MF 698 Turbo two-wheel drive or four-wheel drive?

The Massey Ferguson MF 698 Turbo is four-wheel drive (4WD).

What PTO does an MF 698 Turbo have?

An MF 698 Turbo has a 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Massey Ferguson MF 698T”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 698TCC BY-SA 4.0, WIKIBOOKS-TL-86970 · revision 1066507. Wikibooks contributors (Traktorenlexikon). Original document