- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 1996–2001
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Case-Steyr M 948 (a) Full specifications
PERKINS 903-27 three-cylinder diesel. The manufacturer claimed 47.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
47.3 hp
35.3 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr M 948”, claimed
- Weight
- 5,203 lb
- 3-point lift
- 4,894 lb
- Hyd. flow
- 8.1 gpm
- Top speed
- 18.6–24.9 mph
Case-Steyr M 948 (a) specs: key facts
The Case-Steyr M 948 (a) was built from 1996 to 2001.
The Case-Steyr M 948 (a) has a claimed engine power (gross or net not stated) of 35.3 kW (47.3 hp); it has no measured PTO figure.
The Case-Steyr M 948 (a) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Case-Steyr M 948 (a) has a PERKINS 903-27 engine, a 3-cylinder 2.70 L diesel unit.
The Case-Steyr M 948 (a) weighs 2,360 kg (5,203 lb) unladen.
The Case-Steyr M 948 (a) has a rear PTO running at 540/1000 rpm.
The three-point hitch of the Case-Steyr M 948 (a) lifts 2,220 kg (4,894 lb) at the lower-link ends.
The hydraulic pump of the Case-Steyr M 948 (a) delivers 30.8 L/min (8.1 gpm).
Source · Traktorenlexikon, “Steyr M 948”
How much horsepower does an M 948 (a) have?
The only figure for the M 948 (a) is 47.3 hp (35.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Steyr M 948”
What engine is in an M 948 (a)?
An M 948 (a) has a PERKINS 903-27, a 3-cylinder 2.70 L diesel engine.
| Make & model | PERKINS 903-27 |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 164.8 ci · 2.70 L |
| Max torque | 155 lb·ft · 210 N·m |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Steyr M 948”
How much will an M 948 (a) lift, and what is its hydraulic flow?
An M 948 (a) lifts 4,894 lb (2,220 kg) at the lower-link ends.
| Pump flow | 8.1 gpm · 30.8 L/min |
|---|---|
| Pressure | 3,481 psi · 240 bar |
| Lift at ends | 4,894 lb · 2,220 kg |
| Rear PTO | 540/1000 rpm |
Source · Traktorenlexikon, “Steyr M 948”
What transmission does an M 948 (a) have?
Transmission specifications for the M 948 (a) are below.
| Clutch | Dry Carraro double clutch |
|---|---|
| Steering | Hydrostatic ZF steering with separate oil circuit |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Steyr M 948”
How much does an M 948 (a) weigh?
An M 948 (a) weighs 5,203 lb (2,360 kg) unladen.
| Unladen weight | 5,203 lb · 2,360 kgtwo-wheel-drive version |
|---|---|
| Maximum permissible mass | 9,259 lb · 4,200 kg |
| Wheelbase | 83.3 in · 2,117 mm |
| Length | 139.0 in · 3,530 mmtwo-wheel-drive version |
| Width | 74.4 in · 1,890 mm |
| Height | 91.7 in · 2,330 mm |
| Ground clearance | 16.1 in · 410 mmtwo-wheel-drive version |
| Front track | 52.0 in · 1,322 mmtwo-wheel-drive version |
| Rear track | 53.5–58.7 in · 1,360–1,492 mmthe article lists alternatives |
Source · Traktorenlexikon, “Steyr M 948”
Which tractors compare with an M 948 (a)?
Within 10% of its 47.3 hp of claimed engine power, the same type, and first built within 15 years of it.
- WHITE 604547.3 hp engine, claimed · 1996–1999Side by side with the M 948 (a) →
- AGCO-ALLIS 565047.3 hp engine, claimed · 1994–1999Side by side with the M 948 (a) →
- Lamborghini R 483 (DT)47.3 hp engine, claimed · 1982–1985Side by side with the M 948 (a) →
- AGRIFULL 80-50 (DT)47.3 hp engine, claimed · 1981–1986Side by side with the M 948 (a) →
- Steyr 8055 (a)47.3 hp engine, claimed · 1981–1992Side by side with the M 948 (a) →
- Fendt Farmer 102 LS/LSA47.1 hp engine, claimed · 1981–1982Side by side with the M 948 (a) →
Everything else people ask
Is an M 948 (a) two-wheel drive or four-wheel drive?
The Case-Steyr M 948 (a) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an M 948 (a) have?
An M 948 (a) has a 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Steyr M 948”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr M 948 — CC BY-SA 4.0, WIKIBOOKS-TL-85937 · revision 1007453. Wikibooks contributors (Traktorenlexikon). Original document