• Rigid chassis
  • WhichTractor size: Compact
  • Lab tested ×1
  • 1996–2001

It sits on the compact/utility boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Case-IH CS-48 (A) specs: hp, weight, years

PERKINS 903-27 three-cylinder diesel or Perkins 903.27 diesel. The manufacturer claimed 47.3 horsepower. The only laboratory test on record is of one version: OECD Test 1773 measured 46.3 hp at the PTO of the CS 48 a (4 WD). Compared at the engine's rated speed, where the brochure figure is quoted, the shaft gave 46.3 hp — 2.3% below the claim.

Engine power, claimed · gross or net not stated

47.3 hp

35.3 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case-IH CS48/a”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
5,203 lb
3-point lift
4,894 lb
Hyd. flow
8.1 gpm
Top speed
18.6–24.9 mph

Case-IH CS-48 (A) specs: key facts

  • The Case-IH CS-48 (A) was built from 1996 to 2001.

  • Only one version of the Case-IH CS-48 (A) has a laboratory test on record: the CS 48 a (4 WD) produced 34.5 kW (46.3 hp) at the PTO, measured on OECD Test 1773.Source 1

  • The Case-IH CS-48 (A) has a claimed engine power (gross or net not stated) of 35.3 kW (47.3 hp); it has no measured PTO figure.

  • The Case-IH CS-48 (A) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Case-IH CS-48 (A) has a PERKINS 903-27 engine, a 3-cylinder 2.70 L diesel unit.Source 4

  • The Case-IH CS-48 (A) weighs 2,360 kg (5,203 lb) unladen.

  • The Case-IH CS-48 (A) has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Case-IH CS-48 (A) lifts 2,220 kg (4,894 lb) at the lower-link ends.

  • The hydraulic pump of the Case-IH CS-48 (A) delivers 30.8 L/min (8.1 gpm).

Source · Traktorenlexikon, “Case-IH CS48/a”

How does the CS-48 (A) compare with its class?

  • Strength:

    A maximum engine torque of 210 N·m is high for its class — 24% above the median of 169 N·m across the 231 machines within 10% of its power that hold this figure.

  • Strength:

    16 forward gears is high for its class — 100% above the median of 8 across the 303 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 308 comparable records. How we work this out

Illustration of the 1996–2001 Case-IH CS-48 (A), a 47 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a CS-48 (A) have?

The only laboratory test on record is of one version. OECD Test 1773 measured 46.3 hp at the PTO of the CS 48 a (4 WD). For the CS-48 (A) as a whole the figure is the 47.3 hp claimed for the engine, which is not power at the shaft.

Engine, claimed (gross/net not stated)
47.3 hp

Sources · Traktorenlexikon, “Case-IH CS48/a”; OECD test report 1773, 1998

What engine is in a CS-48 (A)?

A CS-48 (A) has a PERKINS 903-27, a 3-cylinder 2.70 L diesel engine. CS 48 a (4 WD) tractors have a Perkins 903.27.

Engine — CS-48 (A) engine specifications
Make & modelPERKINS 903-27Source 4
Cylinders3, liquid-cooledSource 4
Displacement164.8 ci · 2.70 LSource 4
Max torque155 lb·ft · 210 N·m @ 1,400 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Case-IH CS48/a”

How much will a CS-48 (A) lift, and what is its hydraulic flow?

A CS-48 (A) lifts 4,894 lb (2,220 kg) at the lower-link ends.

Hydraulics & PTO — CS-48 (A) hydraulics and PTO specifications
Pump flow8.1 gpm · 30.8 L/min
Pressure3,481 psi · 240 bar
Lift at ends4,894 lb · 2,220 kg
Rear PTO540/1000 rpm @ 2,045 engine rpm
PTO shaft1 3/8"- 6 splines (Form-1)

Source · Traktorenlexikon, “Case-IH CS48/a”

What transmission does a CS-48 (A) have?

Transmission specifications for the CS-48 (A) are below.

Transmission — CS-48 (A) transmission specifications
ClutchDry Carraro double clutch
BrakesPedal operated dry Sirmac multi-disc brake acting on differential side shafts
SteeringHydrostatic ZF steering
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Case-IH CS48/a”

How much does a CS-48 (A) weigh?

A CS-48 (A) weighs 5,203 lb (2,360 kg) unladen.

Weights & dimensions — CS-48 (A) weights and dimensions
Unladen weight5,203 lb · 2,360 kgtwo-wheel-drive version
Maximum permissible mass9,259 lb · 4,200 kg
Wheelbase83.3 in · 2,117 mm
Length139.0 in · 3,530 mmtwo-wheel-drive version
Width74.4 in · 1,890 mm
Height91.7 in · 2,330 mm
Ground clearance16.1 in · 410 mmtwo-wheel-drive version
Front track52.0 in · 1,322 mmtwo-wheel-drive version
Rear track53.5–58.7 in · 1,360–1,492 mmthe article lists alternatives

Source · Traktorenlexikon, “Case-IH CS48/a”

What oil does a CS-48 (A) take, and how much?

A CS-48 (A) engine takes 7.9 qt (7.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

CS-48 (A) fluid capacities, grades and service intervals
SystemCapacity
Engine oil7.9 qt · 7.5 LSource: Traktorenlexikon, “Case-IH CS48/a” · single source, not independently verified
Transmission23.2 qt · 22.0 LSource: Traktorenlexikon, “Case-IH CS48/a” · single source, not independently verified
Hydraulic15.9 qt · 15.0 LSource: Traktorenlexikon, “Case-IH CS48/a” · single source, not independently verified
Front axle5.3 qt · 5.0 LSource: Traktorenlexikon, “Case-IH CS48/a” · single source, not independently verified
Cooling system12.7 qt · 12.0 LSource: Traktorenlexikon, “Case-IH CS48/a” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

How much fuel does a CS-48 (A) burn per hour?

Measured on OECD Test 1773 (tested as the CS 48 a (4 WD)), at each condition the laboratory recorded.

Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).

Fuel use measured on OECD Test 1773
Test conditionFuel per hour
Maximum PTO powerPTO 34.5 kW (46.3 hp) at 594 rpm10.63 L/h 2.81 gal/h
Rated engine speedPTO 34.5 kW (46.3 hp) at 594 rpm10.63 L/h 2.81 gal/h
Standard PTO speedPTO 33.0 kW (44.3 hp) at 540 rpm9.91 L/h 2.62 gal/h
75% load, 50% loadNot on record for this test

Source · OECD Test 1773

Which tractors compare with a CS-48 (A)?

Within 10% of its 47.3 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Case-IH CS-48 (A)

Is a CS-48 (A) two-wheel drive or four-wheel drive?

The Case-IH CS-48 (A) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a CS-48 (A) have?

A CS-48 (A) has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) shaft.

Sources and how this page was built

Compiled from OECD tractor test report 1773; Traktorenlexikon, “Case-IH CS48/a”; Traktorenlexikon, “Steyr M 948”; and Traktorenlexikon, “Massey Ferguson MF 4215”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 1/1 773: Case IH CS 48 a — Licence not stated by the publisher; facts cited, OECD-1773 · published 1998-08-24 · retrieved 2026-09-14. OECD; testing station BLT, Wieselburg, Austria. Original document
  2. Traktorenlexikon: Case-IH CS48/a — CC BY-SA 4.0, WIKIBOOKS-TL-115667 · revision 981877. Wikibooks contributors (Traktorenlexikon). Original document
  3. Traktorenlexikon: Massey Ferguson MF 4215 — CC BY-SA 4.0, WIKIBOOKS-TL-87128 · revision 992217. Wikibooks contributors (Traktorenlexikon). Original document
  4. Traktorenlexikon: Steyr M 948 — CC BY-SA 4.0, WIKIBOOKS-TL-85937 · revision 1007453. Wikibooks contributors (Traktorenlexikon). Original document