6 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 485 (DT)1985–1990No measured PTO figureTractor twoCASE-INTERNATIONAL 495 (DT)1990–1993No measured PTO figure

Which should you choose?

Read our verdict on the 485 (DT) and the 495 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 11 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 485 (DT) and CASE-INTERNATIONAL 495 (DT), field by field
Field	485 (DT)	495 (DT)	Gap
Engine
Engine power, claimed claimed	51.2 hp	51.2 hp	—
Engine declared	IHC D-179	IHC D-179	—
Displacement declared	2.93 L	2.93 L	—
Maximum torque declared	121 lb·ft · 164 N·m	134 lb·ft · 182 N·m	+11% 495 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	pedal-operated dry Laycock single-plate clutch, type 11 inches, designed as driving clutch	Pedal-operated dry single-disc clutch and hand lever operated wet multi-disc clutch	differs
Hydraulics & hitch
Pump flow declared	12.1 gpm · 45.7 L/min	15.6 gpm · 59.2 L/min	+30% 495 (DT)
Three-point lift, at the coupling points declared	3,439 lb · 1,560 kg	3,704 lb · 1,680 kg	+8% 495 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,199 lb · 2,358 kg	5,199 lb · 2,358 kg	—
Wheelbase declared	79.6 in · 2,022 mm	79.1 in · 2,010 mm	—
Length declared	139.2 in · 3,535 mm	136.0 in · 3,454 mm	—
Width declared	72.4–90.6 in · 1,840–2,300 mm	66.0 in · 1,676 mm	differs
Height, over the cab declared	90.9 in · 2,310 mm	93.5 in · 2,375 mm	—
Ground clearance declared	9.3 in · 236 mm	22.1 in · 561 mm	+138% 495 (DT)
Turning radius, braked declared	11.1 ft · 3.38 m	11.1 ft · 3.38 m	—
Fuel tank declared	80.0 qt · 75.7 L	80.0 qt · 75.7 L	—

Source

Source