- Rigid chassis
- WhichTractor size: High-power
- Lab tested ×1
- 1999–2002
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Case-IH MX 200 specs: hp, weight, years
Consolidated Diesel Company 6TAA-830 six-cylinder or CUMMINS CDC 6TAA-830 diesel. The brochure said 201 horsepower. OECD strapped one to a dynamometer and got 193.1 at the power take-off — and that is the number to size an implement from. Compared at the engine's rated speed, where the brochure figure is quoted, the shaft gave 165.8 hp — 17.6% below the claim.
Measured at the PTO shaft
193.1 hp
Brochure claimed 201 hp difference −4%
Source · OECD Test 1891, measured
- Drawbar hp
- 164.8
- Weight
- 19,674 lb
- 3-point lift
- 16,435 lb
- Hyd. flow
- 31.2 gpm
- Top speed
- 24.9 mph
Case-IH MX 200 specs: key facts
The Case-IH MX 200 was built from 1999 to 2002 and produced 144.0 kW (193.1 hp) at the PTO, measured on OECD Test 1891.Source 1
The claimed engine power (gross or net not stated) of the Case-IH MX 200 is 150 kW (201 hp); that is a claim for the engine, not a measurement at the PTO.
The Case-IH MX 200 is four-wheel drive (4WD).Source 1
The Case-IH MX 200 has a Consolidated Diesel Company 6TAA-830 engine, a 6-cylinder 8.27 L unit.Source 1
The Case-IH MX 200 weighs 8,924 kg (19,674 lb) unladen.
The Case-IH MX 200 has a rear PTO running at 540/1000 rpm.
The three-point hitch of the Case-IH MX 200 lifts 7,455 kg (16,435 lb) at the lower-link ends.
The hydraulic pump of the Case-IH MX 200 delivers 118.1 L/min (31.2 gpm).
Source · Traktorenlexikon, “Case-IH MX200”

How much horsepower does an MX 200 have at the PTO?
At the PTO shaft an MX 200 has 193.1 hp (144.0 kW), measured on OECD Test 1891 — against 201 hp claimed for the engine. Between the flywheel and the PTO you lose the fan, the alternator, the hydraulic pump and the transmission — which is why the brochure figure is the wrong one to size an implement from.
Sources · OECD test report 1891, 2000; Traktorenlexikon, “Case-IH MX200”
What engine is in an MX 200?
An MX 200 has a Consolidated Diesel Company 6TAA-830, a 6-cylinder 8.27 L engine. Diesel tractors have a CUMMINS CDC 6TAA-830.
| Make & model | Consolidated Diesel Company 6TAA-830 |
|---|---|
| Cylinders | 6, liquid-cooledSource 3 |
| Displacement | 504.5 ci · 8.27 L |
| Aspiration | supercharged |
| Max torque | 659 lb·ft · 894 N·m @ 1,450 rpmSource 3 |
| Injection | Direct injectionSource 3 |
| Electrical system | 12 VSource 3 |
Source · OECD test report 1891, 2000
How much will an MX 200 lift, and what is its hydraulic flow?
An MX 200 lifts 16,435 lb (7,455 kg) at the lower-link ends of its Category 3 three-point hitch.
| System | Closed centreSource 1 |
|---|---|
| Pump flow | 31.2 gpm · 118.1 L/min |
| Pressure | 3,408 psi · 235 bar |
| Hitch category | Category 3 |
| Lift at ends | 16,435 lb · 7,455 kg |
| Rear PTO | 540/1000 rpm @ 1,982 engine rpm |
| PTO shaft | 35 mm, 6 splines / 44.5 mm, 20 splinesSource 1 |
Source · Traktorenlexikon, “Case-IH MX200”
What transmission does an MX 200 have?
Transmission specifications for the MX 200 are below.
| Clutch | Wet Case-IH multi-disc transmission clutch integrated in the gearbox |
|---|---|
| Brakes | Pedal-operated, hydraulic wet Case-IH full disc brake acting on differential side shafts |
| Steering | Hydrostatic Eaton steering with two double-acting steering cylinders |
| Top speed | 24.9 mph · 40 km/h |
Source · Traktorenlexikon, “Case-IH MX200”
How much does an MX 200 weigh?
An MX 200 weighs 19,674 lb (8,924 kg) unladen.
| Unladen weight | 19,674 lb · 8,924 kg |
|---|---|
| Maximum permissible mass | 30,865 lb · 14,000 kg |
| Maximum front axle load | 13,294 lb · 6,030 kg |
| Maximum rear axle load | 22,046 lb · 10,000 kg |
| Wheelbase | 118.3 in · 3,006 mm |
| Length | 222.0 in · 5,640 mm |
| Width | 120.0–151.4 in · 3,048–3,845 mm |
| Height | 126.5 in · 3,214 mm |
| Ground clearance | 13.5 in · 343 mm |
| Front track | 60.0–88.0 in · 1,524–2,235 mm |
| Rear track | 61.0–132.1 in · 1,549–3,355 mm |
Source · Traktorenlexikon, “Case-IH MX200”
What oil does an MX 200 take, and how much?
An MX 200 engine takes 22.2 qt (21.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 22.2 qt · 21.0 LSource: Traktorenlexikon, “Case-IH MX200” · single source, not independently verified |
| Transmission & hydraulic | 181.8 qt · 172.0 LSource: Traktorenlexikon, “Case-IH MX200” · single source, not independently verified |
| Front axle | 15.0 qt · 14.2 LSource: Traktorenlexikon, “Case-IH MX200” · single source, not independently verified |
| Final drives | 1.8 qt · 1.7 LSource: Traktorenlexikon, “Case-IH MX200” · single source, not independently verified |
| Cooling system | 21.1 qt · 20.0 LSource: Traktorenlexikon, “Case-IH MX200” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
What did OECD measure on Test 1891?
OECD Test 1891 recorded 193.1 hp at the PTO and 164.8 hp at the drawbar. Configuration as printed: “4 WD · 18 speeds - 40 km/h”.
| PTO power, maximum | 193.1 hp at 861 PTO rpm · 144.0 kW @ 1,700 engine rpm |
|---|---|
| PTO power, rated engine speed | 165.8 hp at 1,013 PTO rpm · 123.6 kW @ 2,000 engine rpmSource 2 |
| PTO power, standard PTO speed | 170.8 hp at 1,000 PTO rpm · 127.4 kW @ 1,973 engine rpmSource 2 |
| Drawbar power, unballasted | 164.8 hp · 122.9 kW |
Source · OECD test report 1891, 2000
How much fuel does an MX 200 burn per hour?
Measured on OECD Test 1891 (tested as the MX 200 (4 WD)), at each condition the laboratory recorded.
Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).
| Test condition | Fuel per hour |
|---|---|
| Maximum PTO powerPTO 144.0 kW (193.1 hp) at 861 rpm | 37.69 L/h 9.96 gal/h |
| Rated engine speedPTO 123.6 kW (165.8 hp) at 1,013 rpm | 35.71 L/h 9.43 gal/h |
| Standard PTO speedPTO 127.4 kW (170.8 hp) at 1,000 rpm | 36.27 L/h 9.58 gal/h |
| 75% load, 50% load | Not on record for this test |
Source · OECD Test 1891
Which tractors compare with an MX 200?
Within 10% of its 193.1 hp measured at the PTO, the same type, and first built within 15 years of it.
Common questions about the Case-IH MX 200
Is an MX 200 two-wheel drive or four-wheel drive?
The Case-IH MX 200 is four-wheel drive (4WD).
What PTO does an MX 200 have?
An MX 200 has a 540/1000 rpm rear PTO on a 35 mm, 6 splines / 44.5 mm, 20 splines shaft.
What implements will an MX 200 run?
Size PTO implements from the measured 193.1 hp at the shaft, not the brochure figure.
Sources and how this page was built
Compiled from OECD tractor test report 1891; and Traktorenlexikon, “Case-IH MX200”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/1 891: Case IH MX 200 — Licence not stated by the publisher; facts cited, OECD-1891 · published 2000-03-13 · retrieved 2026-09-14. OECD. Original document
- OECD Code 2 test report 2/1 891: Steyr MX 200 — Licence not stated by the publisher; facts cited, OECD-1891 · published 2000-03-13 · retrieved 2026-09-14. OECD. Original document
- Traktorenlexikon: Case-IH MX200 — CC BY-SA 4.0, WIKIBOOKS-TL-90511 · revision 981156. Wikibooks contributors (Traktorenlexikon). Original document