12 material differences
Tractor oneCase-IH MX 2001999–2002193.1 hpMeasured at the PTO · OECD Test 1891Tractor twoJohn Deere 81302006–2009208.3 hpMeasured at the PTO · OECD Test 2376
Which should you choose?
Read our verdict on the MX 200 and the 8130 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | MX 200 | 8130 | Gap |
|---|---|---|---|
| Measured performance | |||
| PTO power, measured measured | 193.1 hp | 208.3 hp | +8% 8130 |
| Drawbar power, measured measured | 164.8 hp | 184.5 hp | +12% 8130 |
| Engine | |||
| Engine power, claimed claimed | 201 hp | — | — |
| Engine declared | Consolidated Diesel Company 6TAA-830 | John Deere 6090HRW01 | differs |
| Displacement declared | 8.27 L | 8.98 L | +9% 8130 |
| Maximum torque declared | 659 lb·ft · 894 N·m | 674 lb·ft · 914.0 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | Wet Case-IH multi-disc transmission clutch integrated in the gearbox | Pedal-operated hydraulic wet John Deere multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | Closed centre | — |
| Pump flow declared | 31.2 gpm · 118.1 L/min | — | — |
| Pressure declared | 3,408 psi · 235 bar | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 19,674 lb · 8,924 kg | 21,319–23,307 lb · 9,670–10,572 kg | differs |
| Maximum permissible mass declared | 30,865 lb · 14,000 kg | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 118.3 in · 3,006 mm | 120.1–126.8 in · 3,050–3,220 mm | differs |
| Length declared | 222.0 in · 5,640 mm | 233.8 in · 5,938 mm | +5% 8130 |
| Width declared | 120.0–151.4 in · 3,048–3,845 mm | 118.6–125.6 in · 3,012–3,190 mm | differs |
| Ground clearance declared | 13.5 in · 343 mm | 13.2–17.3 in · 336–440 mm | differs |
| Fuel tank declared | 528.3 qt · 500.0 L | 720.0 qt · 681.4 L | +36% 8130 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH MX 200 sources
Source
- Source: OECD test report 1891, 2000
- Source: Traktorenlexikon, “Case-IH MX200”
John Deere 8130 sources
Source
- Source: OECD test report 2376, 2007
- Source: Traktorenlexikon, “John Deere 8130”