- Rigid chassis
- WhichTractor size: Compact
- Lab tested ×2
- 2003–2008
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Case-IH JX 1075C specs: hp, weight, years
IVECO 8035.25 three-cylinder diesel or CNH Italia IVECO 8035.25. The manufacturer claimed 75.0 horsepower. The only laboratory test on record is of one version: OECD Test 2114 measured 64.5 hp at the PTO of the JX 1075 C (4 WD); OECD Test 2149 measured 64.5 hp at the PTO of the JX 1075 C (2 WD). Compared at the engine's rated speed, where the brochure figure is quoted, the shaft gave 63.8 hp — 14.8% below the claim.
Engine power, claimed · gross or net not stated
75.0 hp
55.9 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH JX1075C”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 5,919 lb
- 3-point lift
- 5,309 lb
- Hyd. flow
- 16.9 gpm
- Top speed
- 18.6–24.9 mph
Case-IH JX 1075C specs: key facts
The Case-IH JX 1075C was built from 2003 to 2008.
Only one version of the Case-IH JX 1075C has a laboratory test on record: the JX 1075 C (4 WD) produced 48.1 kW (64.5 hp) at the PTO, measured on OECD Test 2114; the JX 1075 C (2 WD) produced 48.1 kW (64.5 hp) at the PTO, measured on OECD Test 2149.Source 1,Source 2
The Case-IH JX 1075C has a claimed engine power (gross or net not stated) of 55.9 kW (75.0 hp); it has no measured PTO figure.
The Case-IH JX 1075C was offered in two-wheel-drive and four-wheel-drive versions.
The Case-IH JX 1075C has a IVECO 8035.25 engine, a 3-cylinder 2.93 L diesel unit.Source 4
The Case-IH JX 1075C weighs 2,685 kg (5,919 lb) unladen.
The Case-IH JX 1075C has an independent rear PTO running at 540E/540/1000E/1000 rpm.
The three-point hitch of the Case-IH JX 1075C lifts 2,408 kg (5,309 lb) at the lower-link ends.
The hydraulic pump of the Case-IH JX 1075C delivers 63.9 L/min (16.9 gpm).
Source · Traktorenlexikon, “Case-IH JX1075C”
How much horsepower does a JX 1075C have?
The only laboratory test on record is of one version. OECD Test 2114 measured 64.5 hp at the PTO of the JX 1075 C (4 WD); OECD Test 2149 measured 64.5 hp at the PTO of the JX 1075 C (2 WD). For the JX 1075C as a whole the figure is the 75.0 hp claimed for the engine, which is not power at the shaft.
Sources · Traktorenlexikon, “Case-IH JX1075C”; OECD test report 2114, 2004; OECD test report 2149, 2004
What engine is in a JX 1075C?
A JX 1075C has an IVECO 8035.25, a 3-cylinder 2.93 L diesel engine. JX 1075 C (4 WD) tractors have a CNH Italia IVECO 8035.25. JX 1075 C (2 WD) tractors have a CNH Italia IVECO 8035.25.
| Make & model | IVECO 8035.25Source 4 |
|---|---|
| Cylinders | 3, liquid-cooledSource 4 |
| Displacement | 178.9 ci · 2.93 LSource 4 |
| Max torque | 201 lb·ft · 273 N·m @ 1,421 rpm |
| Injection | direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Case-IH JX1075C”
How much will a JX 1075C lift, and what is its hydraulic flow?
A JX 1075C lifts 5,309 lb (2,408 kg) at the lower-link ends.
| Pump flow | 16.9 gpm · 63.9 L/min |
|---|---|
| Pressure | 2,466 psi · 170 bar |
| Lift at ends | 5,309 lb · 2,408 kg |
| Rear PTO | Independent, engine-driven, 540E/540/1000E/1000 rpm @ 2,196 engine rpmGround-speed PTO available |
| PTO shaft | 1 3/8"- 6 splines (Form-1) and 1 3/8"- 21 part (Form-2) |
Source · Traktorenlexikon, “Case-IH JX1075C”
What transmission does a JX 1075C have?
Transmission specifications for the JX 1075C are below.
| Clutch | Dry LuK double clutch |
|---|---|
| Brakes | Pedal-operated wet CNH multi-disc brake acting on differential side shafts |
| Steering | Hydrostatic Danfoss steering |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Case-IH JX1075C”
How much does a JX 1075C weigh?
A JX 1075C weighs 5,919 lb (2,685 kg) unladen.
| Unladen weight | 5,919 lb · 2,685 kgtwo-wheel-drive version |
|---|---|
| Maximum permissible mass | 10,582 lb · 4,800 kg |
| Wheelbase | 83.9 in · 2,130 mmtwo-wheel-drive version |
| Length | 135.4 in · 3,440 mm |
| Width | 73.5 in · 1,867 mm |
| Height | 94.9 in · 2,410 mm |
| Ground clearance | 13.8 in · 350 mm |
| Front track | 56.7–63.3 in · 1,439–1,607 mmtwo-wheel-drive version |
| Rear track | 48.5–76.7 in · 1,232–1,949 mmtwo-wheel-drive version |
Source · Traktorenlexikon, “Case-IH JX1075C”
What oil does a JX 1075C take, and how much?
A JX 1075C engine takes 7.9 qt (7.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 7.9 qt · 7.5 LSource: Traktorenlexikon, “Case-IH JX1075C” · single source, not independently verified |
| Hydraulic | 44.4 qt · 42.0 LSource: Traktorenlexikon, “Case-IH JX1075C” · single source, not independently verified |
| Cooling system | 12.7 qt · 12.0 LSource: Traktorenlexikon, “Case-IH JX1075C” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
How much fuel does a JX 1075C burn per hour?
Measured on OECD Test 2114 (tested as the JX 1075 C (4 WD)), at each condition the laboratory recorded.
1 other test of this model is on record; figures differ between configurations.
Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).
| Test condition | Fuel per hour |
|---|---|
| Maximum PTO powerPTO 48.1 kW (64.5 hp) at 552 rpm | 15.00 L/h 3.96 gal/h |
| Rated engine speedPTO 47.6 kW (63.8 hp) at 565 rpm | 14.90 L/h 3.94 gal/h |
| Standard PTO speedPTO 47.5 kW (63.7 hp) at 540 rpm | 14.80 L/h 3.91 gal/h |
| 75% load, 50% load | Not on record for this test |
Source · OECD Test 2114
Which tractors compare with a JX 1075C?
Within 10% of its 75.0 hp of claimed engine power, the same type, and first built within 15 years of it.
- New Holland TN 75 DA/SA75.0 hp engine, claimed · 2003–2008Side by side with the JX 1075C →
- Steyr 375 Kompakt75.0 hp engine, claimed · 2004–2008Side by side with the JX 1075C →
- Deutz-Fahr Agrofarm 8575.0 hp engine, claimed · 2007–2008Side by side with the JX 1075C →
- New Holland T 503075.0 hp engine, claimed · 2008–2012Side by side with the JX 1075C →
- Massey Ferguson 5425 (A)74.0 hp engine, claimed · 2003–2011Side by side with the JX 1075C →
- Deutz-Fahr Agrotron 80 MK374.0 hp engine, claimed · 2001–2003Side by side with the JX 1075C →
Common questions about the Case-IH JX 1075C
Is a JX 1075C two-wheel drive or four-wheel drive?
The Case-IH JX 1075C was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a JX 1075C have?
A JX 1075C has a independent 540E/540/1000E/1000 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) and 1 3/8"- 21 part (Form-2) shaft.
Sources and how this page was built
Compiled from OECD tractor test reports 2114 and 2149; Traktorenlexikon, “Case-IH JX1075C”; and Traktorenlexikon, “Steyr 375 Kompakt”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 1/2 114: Case IH JX 1075 C — Licence not stated by the publisher; facts cited, OECD-2114 · published 2004-03-11 · retrieved 2026-09-14. OECD; testing station Università di Bologna, Bologna, Italy. Original document
- OECD Code 2 test report 1/2 149: Case IH JX 1075 C — Licence not stated by the publisher; facts cited, OECD-2149 · published 2004-07-22 · retrieved 2026-09-14. OECD; testing station Università di Bologna, Bologna, Italy. Original document
- Traktorenlexikon: Case-IH JX1075C — CC BY-SA 4.0, WIKIBOOKS-TL-115691 · revision 982394. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Steyr 375 Kompakt — CC BY-SA 4.0, WIKIBOOKS-TL-86423 · revision 1029513. Wikibooks contributors (Traktorenlexikon). Original document