6 material differences · fewer than 12
Tractor oneCase-IH JX 1075 C2003–2008No measured PTO figureTractor twoNew Holland TN 75 DA/SA2003–2008No measured PTO figure
Which should you choose?
Read our verdict on the JX 1075 C and the TN 75 DA/SA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 8 fields identical or within 5%, which is not counted as material
| Field | JX 1075 C | TN 75 DA/SA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 75.0 hp | 75.0 hp | — |
| Engine declared | IVECO 8035.25 | IVECO 8035.25 | — |
| Displacement declared | 2.93 L | 2.93 L | — |
| Maximum torque declared | 201 lb·ft · 273 N·m | 203 lb·ft · 275 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry LuK double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 16.9 gpm · 63.9 L/min | 15.6 gpm · 58.9 L/min | +8% JX 1075 C |
| Pressure declared | 2,466 psi · 170 bar | 3,263 psi · 225 bar | +32% TN 75 DA/SA |
| Rear PTO speeds declared | 540E/540/1000E/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,919 lb · 2,685 kg | 5,214 lb · 2,365 kg | +14% JX 1075 C |
| Maximum permissible mass declared | 10,582 lb · 4,800 kg | — | — |
| Wheelbase declared | 83.9 in · 2,130 mm | 81.5 in · 2,070 mm | — |
| Length declared | 135.4 in · 3,440 mm | 141.8 in · 3,601 mm | — |
| Width declared | 73.5 in · 1,867 mm | 73.5–95.6 in · 1,867–2,428 mm | differs |
| Ground clearance declared | 13.8 in · 350 mm | 13.9 in · 353 mm | — |
| Fuel tank declared | 79.3 qt · 75.0 L | 56.0 qt · 53.0 L | +42% JX 1075 C |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH JX 1075 C sources
- Source: Traktorenlexikon, “Case-IH JX1075C”
- Source: Traktorenlexikon, “Steyr 375 Kompakt”
New Holland TN 75 DA/SA sources
- Source: Traktorenlexikon, “New Holland TN75 DA/SA”
- Source: Traktorenlexikon, “Steyr 375 Kompakt”