- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Compact
- Lab tested ×2
- 2003–2008
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Case-IH JX 1060C specs: hp, weight, years
IVECO 8035.05 C (EURO II) three-cylinder diesel or CNH Italia IVECO 8035.05C. The manufacturer claimed 54.3 horsepower. The only laboratory test on record is of one version: OECD Test 2156 measured 48.3 hp at the PTO of the JX 1060 C (4 WD); OECD Test 2157 measured 48.3 hp at the PTO of the JX 1060 C (2 WD). Compared at the engine's rated speed, where the brochure figure is quoted, the shaft gave 47.2 hp — 13.1% below the claim.
Engine power, claimed · gross or net not stated
54.3 hp
40.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH JX1060C”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 6,978 lb
- Hyd. flow
- 13.8 gpm
- Top speed
- 18.6–24.9 mph
Case-IH JX 1060C specs: key facts
The Case-IH JX 1060C was built from 2003 to 2008.
Only one version of the Case-IH JX 1060C has a laboratory test on record: the JX 1060 C (4 WD) produced 36.0 kW (48.3 hp) at the PTO, measured on OECD Test 2156; the JX 1060 C (2 WD) produced 36.0 kW (48.3 hp) at the PTO, measured on OECD Test 2157.Source 1,Source 2
The Case-IH JX 1060C has a claimed engine power (gross or net not stated) of 40.5 kW (54.3 hp); it has no measured PTO figure.
The Case-IH JX 1060C was built in four-wheel drive (4WD) and two-wheel drive (2WD) versions, depending on configuration.Source 1,Source 2
The Case-IH JX 1060C has a IVECO 8035.05 C (EURO II) engine, a 3-cylinder 2.93 L diesel unit.
The Case-IH JX 1060C weighs 3,165 kg (6,978 lb) unladen.
The Case-IH JX 1060C has a rear PTO running at 540E/540/1000E/1000 rpm.
The hydraulic pump of the Case-IH JX 1060C delivers 52.1 L/min (13.8 gpm).
Source · Traktorenlexikon, “Case-IH JX1060C”
How does the JX 1060C compare with its class?
- Strength:
A hydraulic pump flow of 52.1 L/min is high for its class — 61% above the median of 32.3 L/min across the 289 machines within 10% of its power that hold this figure.
- Worth knowing:
An unladen mass of 3,165 kg is high for its class — 29% above the median of 2,450 kg across the 364 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 364 comparable records. How we work this out
How much horsepower does a JX 1060C have?
The only laboratory test on record is of one version. OECD Test 2156 measured 48.3 hp at the PTO of the JX 1060 C (4 WD); OECD Test 2157 measured 48.3 hp at the PTO of the JX 1060 C (2 WD). For the JX 1060C as a whole the figure is the 54.3 hp claimed for the engine, which is not power at the shaft.
Sources · Traktorenlexikon, “Case-IH JX1060C”; OECD test report 2156, 2004; OECD test report 2157, 2004
What engine is in a JX 1060C?
A JX 1060C has an IVECO 8035.05 C (EURO II), a 3-cylinder 2.93 L diesel engine. JX 1060 C (4 WD) tractors have a CNH Italia IVECO 8035.05C. JX 1060 C (2 WD) tractors have a CNH Italia IVECO 8035.05C.
| Make & model | IVECO 8035.05 C (EURO II) |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 178.9 ci · 2.93 L |
| Max torque | 147 lb·ft · 199 N·m @ 1,280 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Case-IH JX1060C”
How much will a JX 1060C lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the JX 1060C are below.
| Pump flow | 13.8 gpm · 52.1 L/min |
|---|---|
| Rear PTO | 540E/540/1000E/1000 rpm @ 2,196 engine rpm |
| PTO shaft | 1 3/8"- 6 splines or 1 3/8"- 21 part |
Source · Traktorenlexikon, “Case-IH JX1060C”
What transmission does a JX 1060C have?
Transmission specifications for the JX 1060C are below.
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
|---|
Source · Traktorenlexikon, “Case-IH JX1060C”
How much does a JX 1060C weigh?
A JX 1060C weighs 6,978 lb (3,165 kg) unladen.
| Unladen weight | 6,978 lb · 3,165 kg |
|---|---|
| Maximum permissible mass | 10,582 lb · 4,800 kg |
| Wheelbase | 83.9 in · 2,130 mm |
| Length | 144.2 in · 3,662 mm |
| Width | 73.5–95.6 in · 1,867–2,428 mm |
| Height | 94.9 in · 2,410 mm |
| Ground clearance | 13.9 in · 353 mm |
| Front track | 56.7–63.3 in · 1,439–1,607 mm |
| Rear track | 48.5–76.7 in · 1,232–1,949 mm |
Source · Traktorenlexikon, “Case-IH JX1060C”
What oil does a JX 1060C take, and how much?
A JX 1060C engine takes 7.9 qt (7.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 7.9 qt · 7.5 LSource: Traktorenlexikon, “Case-IH JX1060C” · single source, not independently verified |
| Hydraulic | 44.4 qt · 42.0 LSource: Traktorenlexikon, “Case-IH JX1060C” · single source, not independently verified |
| Cooling system | 12.7 qt · 12.0 LSource: Traktorenlexikon, “Case-IH JX1060C” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
How much fuel does a JX 1060C burn per hour?
Measured on OECD Test 2156 (tested as the JX 1060 C (4 WD)), at each condition the laboratory recorded.
1 other test of this model is on record; figures differ between configurations.
Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).
| Test condition | Fuel per hour |
|---|---|
| Maximum PTO powerPTO 36.0 kW (48.3 hp) at 546 rpm | 11.41 L/h 3.01 gal/h |
| Rated engine speedPTO 35.2 kW (47.2 hp) at 565 rpm | 11.42 L/h 3.02 gal/h |
| Standard PTO speedPTO 35.3 kW (47.3 hp) at 540 rpm | 11.23 L/h 2.97 gal/h |
| 75% load, 50% load | Not on record for this test |
Source · OECD Test 2156
Which tractors compare with a JX 1060C?
Within 10% of its 54.3 hp of claimed engine power, the same type, and first built within 15 years of it.
- Case-IH JX 55 (A)54.3 hp engine, claimed · 2002–2004Side by side with the JX 1060C →
- New Holland 4135 (A)54.3 hp engine, claimed · 1996–1999Side by side with the JX 1060C →
- Case-IH C-55 (A)54.3 hp engine, claimed · 1995–1997Side by side with the JX 1060C →
- Renault Ceres 65/II54.3 hp engine, claimed · 1994–1998Side by side with the JX 1060C →
- Massey Ferguson 352 (A)54.3 hp engine, claimed · 1993–1997Side by side with the JX 1060C →
- Fiat 55-66 S (DT)54.3 hp engine, claimed · 1992–1995Side by side with the JX 1060C →
Common questions about the Case-IH JX 1060C
Is a JX 1060C two-wheel drive or four-wheel drive?
The Case-IH JX 1060C was built in four-wheel drive (4WD) and two-wheel drive (2WD) versions, depending on configuration.
What PTO does a JX 1060C have?
A JX 1060C has a 540E/540/1000E/1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/8"- 21 part shaft.
Sources and how this page was built
Compiled from OECD tractor test reports 2156 and 2157; and Traktorenlexikon, “Case-IH JX1060C”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 1/2 156: Case IH JX 1060 C — Licence not stated by the publisher; facts cited, OECD-2156 · published 2004-08-04 · retrieved 2026-09-14. OECD; testing station Università di Bologna, Bologna, Italy. Original document
- OECD Code 2 test report 1/2 157: Case IH JX 1060 C — Licence not stated by the publisher; facts cited, OECD-2157 · published 2004-08-04 · retrieved 2026-09-14. OECD; testing station Università di Bologna, Bologna, Italy. Original document
- Traktorenlexikon: Case-IH JX1060C — CC BY-SA 4.0, WIKIBOOKS-TL-115673 · revision 981942. Wikibooks contributors (Traktorenlexikon). Original document