12 material differences

Tractor oneCase-IH JX 1060 C2003–2008No measured PTO figureTractor twoFiat 55-66 S (DT)1992–1995No measured PTO figure

Which should you choose?

We will not advise between these two machines, because they were not built in overlapping years (2003–2008; 1992–1995). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

12 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH JX 1060 C and Fiat 55-66 S (DT), field by field
Field	JX 1060 C	55-66 S (DT)	Gap
Engine
Engine power, claimed claimed	54.3 hp	54.3 hp	—
Engine declared	IVECO 8035.05 C (EURO II)	FIAT-IVECO 8035.06	differs
Displacement declared	2.93 L	2.71 L	+8% JX 1060 C
Maximum torque declared	147 lb·ft · 199 N·m	130 lb·ft · 176 N·m	+13% JX 1060 C
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Dry OMG or LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	13.8 gpm · 52.1 L/min	9.1 gpm · 34.5 L/min	+51% JX 1060 C
Pressure declared	—	3,118 psi · 215 bar	—
Rear PTO speeds declared	540E/540/1000E/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,978 lb · 3,165 kg	5,809 lb · 2,635 kg	+20% JX 1060 C
Maximum permissible mass declared	10,582 lb · 4,800 kg	8,488 lb · 3,850 kg	+25% JX 1060 C
Wheelbase declared	83.9 in · 2,130 mm	78.7 in · 1,999 mm	+7% JX 1060 C
Length declared	144.2 in · 3,662 mm	127.6 in · 3,241 mm	+13% JX 1060 C
Width declared	73.5–95.6 in · 1,867–2,428 mm	60.6–84.3 in · 1,540–2,140 mm	differs
Height, over the cab declared	94.9 in · 2,410 mm	89.4 in · 2,270 mm	+6% JX 1060 C
Ground clearance declared	13.9 in · 353 mm	18.1 in · 460 mm	+30% 55-66 S (DT)
Fuel tank declared	74.0 qt · 70.0 L	77.1 qt · 73.0 L	—

Case-IH JX 1060 C sources

Source

Source: Traktorenlexikon, “Case-IH JX1060C”

Fiat 55-66 S (DT) sources