8 material differences · fewer than 12
Tractor oneCase-IH JX 1060 C2003–2008No measured PTO figureTractor twoMassey Ferguson MF 352 (A)1993–1997No measured PTO figure
Which should you choose?
Read our verdict on the JX 1060 C and the MF 352 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | JX 1060 C | MF 352 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 54.3 hp | 54.3 hp | — |
| Engine declared | IVECO 8035.05 C (EURO II) | Perkins AT 3.152-4 | differs |
| Displacement declared | 2.93 L | 2.50 L | +17% JX 1060 C |
| Maximum torque declared | 147 lb·ft · 199 N·m | 133 lb·ft · 180 N·m | +11% JX 1060 C |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 13.8 gpm · 52.1 L/min | 15.1 gpm · 57.0 L/min | +9% MF 352 (A) |
| Pressure declared | — | 2,973–3,481 psi · 205–240 bar | — |
| Rear PTO speeds declared | 540E/540/1000E/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,978 lb · 3,165 kg | 5,512 lb · 2,500 kg | +27% JX 1060 C |
| Maximum permissible mass declared | 10,582 lb · 4,800 kg | — | — |
| Wheelbase declared | 83.9 in · 2,130 mm | 81.9 in · 2,080 mm | — |
| Length declared | 144.2 in · 3,662 mm | 141.9 in · 3,604 mm | — |
| Width declared | 73.5–95.6 in · 1,867–2,428 mm | 77.9 in · 1,979 mm | differs |
| Ground clearance declared | 13.9 in · 353 mm | 14.2 in · 360 mm | — |
| Fuel tank declared | 74.0 qt · 70.0 L | 71.9 qt · 68.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH JX 1060 C sources
- Source: Traktorenlexikon, “Case-IH JX1060C”
Massey Ferguson MF 352 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 352”
- Source: Traktorenlexikon, “Massey Ferguson MF 253”