11 material differences · fewer than 12

Tractor oneCase-IH C-64 (A)1995–1997No measured PTO figureTractor twoJohn Deere 5310 (A)1997–2000No measured PTO figure

Which should you choose?

Read our verdict on the C-64 (A) and the 5310 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH C-64 (A) and John Deere 5310 (A), field by field
Field	C-64 (A)	5310 (A)	Gap
Engine
Engine power, claimed claimed	63.2 hp	63.2 hp	—
Engine declared	Steyr WD 301.82 or WD 301.83	John Deere 3.029 T	differs
Displacement declared	3.12 L	2.93 L	+6% C-64 (A)
Maximum torque declared	186 lb·ft · 252 N·m	168 lb·ft · 228 N·m	+11% C-64 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Fichtel & Sachs double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	11.2 gpm · 42.3 L/min	12.7 gpm · 48.1 L/min	+14% 5310 (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,261 lb · 2,840 kg	4,652 lb · 2,110 kg	+35% C-64 (A)
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	87.0 in · 2,209 mm	80.7 in · 2,050 mm	+8% C-64 (A)
Length declared	146.1 in · 3,710 mm	139.2 in · 3,535 mm	—
Width declared	81.5 in · 2,070 mm	72.8 in · 1,850 mm	+12% C-64 (A)
Height, over the cab declared	95.5 in · 2,425 mm	97.0 in · 2,464 mm	—
Ground clearance declared	17.5 in · 445 mm	17.1 in · 435 mm	—
Turning radius, braked declared	11.9 ft · 3.64 m	10.3 ft · 3.15 m	+16% C-64 (A)
Fuel tank declared	66.6 qt · 63.0 L	71.9 qt · 68.0 L	+8% 5310 (A)

Source

Source