- Articulated
- WhichTractor size: High-power
- Not independently tested
- 1990–1995
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Case-IH 9230 Full specifications
CUMMINS 6 TA-830 six-cylinder diesel. The manufacturer claimed 231.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
231.7 hp
172.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 9230”, claimed
- Weight
- 24,108 lb
- 3-point lift
- 14,074 lb
- Hyd. flow
- 29.0 gpm
- Top speed
- 18.6 mph
Case-IH 9230 specs: key facts
The Case-IH 9230 was built from 1990 to 1995.
The Case-IH 9230 has a claimed engine power (gross or net not stated) of 172.8 kW (231.7 hp); it has no measured PTO figure.
The Case-IH 9230 is four-wheel drive (4WD).
The Case-IH 9230 has a CUMMINS 6 TA-830 engine, a 6-cylinder 8.27 L diesel unit.Source 1
The Case-IH 9230 weighs 10,935 kg (24,108 lb) unladen.
The Case-IH 9230 has a rear PTO running at 1000 rpm.
The three-point hitch of the Case-IH 9230 lifts 6,384 kg (14,074 lb) at the lower-link ends.
The hydraulic pump of the Case-IH 9230 delivers 109.8 L/min (29.0 gpm).
Source · Traktorenlexikon, “Case-IH 9230”
How much horsepower does a 9230 have?
The only figure for the 9230 is 231.7 hp (172.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case-IH 9230”
What engine is in a 9230?
A 9230 has a CUMMINS 6 TA-830, a 6-cylinder 8.27 L diesel engine.
| Make & model | CUMMINS 6 TA-830 |
|---|---|
| Cylinders | 6, liquid-cooledSource 2 |
| Displacement | 504.5 ci · 8.27 L |
| Max torque | 628 lb·ft · 852 N·m @ 1,800 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Case-IH 7230 PRO/8930”
How much will a 9230 lift, and what is its hydraulic flow?
A 9230 lifts 14,074 lb (6,384 kg) at the lower-link ends of its Category 3 three-point hitch.
| Pump flow | 29.0 gpm · 109.8 L/min |
|---|---|
| Pressure | 2,306 psi · 159 bar |
| Hitch category | Category 3 |
| Lift at ends | 14,074 lb · 6,384 kg |
| Rear PTO | 1000 rpm |
| PTO shaft | 1 3/4"- 20 teilig |
Source · Traktorenlexikon, “Case-IH 9230”
What transmission does a 9230 have?
Transmission specifications for the 9230 are below.
| Top speed | 18.6 mph · 30 km/h |
|---|
Source · Traktorenlexikon, “Case-IH 9230”
How much does a 9230 weigh?
A 9230 weighs 24,108 lb (10,935 kg) unladen.
| Unladen weight | 24,108 lb · 10,935 kg |
|---|---|
| Wheelbase | 120.4 in · 3,058 mm |
| Length | 252.4 in · 6,410 mm |
| Width | 119.5 in · 3,035 mm |
| Height | 129.1 in · 3,279 mm |
| Ground clearance | 11.0 in · 280 mm |
| Front track | 60.0–130.0 in · 1,524–3,302 mmWikibooks gives one track for both axles |
| Rear track | 60.0–130.0 in · 1,524–3,302 mmWikibooks gives one track for both axles |
| Turning radius, braked | 19.4 ft · 5.91 m |
Source · Traktorenlexikon, “Case-IH 9230”
Which tractors compare with a 9230?
Within 10% of its 207.9 hp at the PTO (claimed), the same type, and first built within 15 years of it.
Everything else people ask
Is a 9230 two-wheel drive or four-wheel drive?
The Case-IH 9230 is four-wheel drive (4WD).
What PTO does a 9230 have?
A 9230 has a 1000 rpm rear PTO on a 1 3/4"- 20 teilig shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Case-IH 9230”; and Traktorenlexikon, “Case-IH 7230 PRO/8930”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 7230 PRO/8930 — CC BY-SA 4.0, WIKIBOOKS-TL-90517 · revision 977810. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Case-IH 9230 — CC BY-SA 4.0, WIKIBOOKS-TL-115584 · revision 978453. Wikibooks contributors (Traktorenlexikon). Original document