- Articulated
- WhichTractor size: High-power
- Not independently tested
- 1979–1982
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Fiat 44-23 Full specifications
CUMMINS NT-855 C 230 six-cylinder diesel. The manufacturer claimed 227.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
227.0 hp
169.3 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiat Fiat 44-23”, claimed
- Weight
- 24,385 lb
- 3-point lift
- 18,298 lb
- Hyd. flow
- 23.6 gpm
- Top speed
- 15.5 mph
Fiat 44-23 specs: key facts
The Fiat 44-23 was built from 1979 to 1982.
The Fiat 44-23 has a claimed engine power (gross or net not stated) of 169.3 kW (227.0 hp); it has no measured PTO figure.
The Fiat 44-23 is four-wheel drive (4WD).
The Fiat 44-23 has a CUMMINS NT-855 C 230 engine, a 6-cylinder 14.01 L diesel unit.
The Fiat 44-23 weighs 11,061 kg (24,385 lb) unladen.
The Fiat 44-23 has an independent rear PTO running at 1000 rpm.
The three-point hitch of the Fiat 44-23 lifts 8,300 kg (18,298 lb) at the lower-link ends.
The hydraulic pump of the Fiat 44-23 delivers 89.4 L/min (23.6 gpm).
Source · Traktorenlexikon, “Fiat Fiat 44-23”
How much horsepower does a 44-23 have?
The only figure for the 44-23 is 227.0 hp (169.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fiat Fiat 44-23”
What engine is in a 44-23?
A 44-23 has a CUMMINS NT-855 C 230, a 6-cylinder 14.01 L diesel engine.
| Make & model | CUMMINS NT-855 C 230 |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 855.1 ci · 14.01 L |
| Max torque | 811 lb·ft · 1,100 N·m @ 1,400 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Fiat Fiat 44-23”
How much will a 44-23 lift, and what is its hydraulic flow?
A 44-23 lifts 18,298 lb (8,300 kg) at the lower-link ends.
| Pump flow | 23.6 gpm · 89.4 L/min |
|---|---|
| Pressure | 3,336–3,481 psi · 230–240 bar |
| Lift at ends | 18,298 lb · 8,300 kg |
| Rear PTO | Independent, engine-driven, 1000 rpmEngages under load |
| PTO shaft | 1 3/4"- 20 splined (Form-3) |
Source · Traktorenlexikon, “Fiat Fiat 44-23”
What transmission does a 44-23 have?
Transmission specifications for the 44-23 are below.
| Clutch | Dry Dana-Spicer double clutch |
|---|---|
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “Fiat Fiat 44-23”
How much does a 44-23 weigh?
A 44-23 weighs 24,385 lb (11,061 kg) unladen.
| Unladen weight | 24,385 lb · 11,061 kg |
|---|---|
| Wheelbase | 130.0 in · 3,302 mm |
| Length | 253.1 in · 6,430 mm |
| Width | 99.6 in · 2,530 mm |
| Height | 126.0 in · 3,200 mm |
| Ground clearance | 16.5 in · 420 mm |
| Front track | 72.0–118.1 in · 1,829–3,000 mmWikibooks gives one track for both axles |
| Rear track | 72.0–118.1 in · 1,829–3,000 mmWikibooks gives one track for both axles |
Source · Traktorenlexikon, “Fiat Fiat 44-23”
Everything else people ask
Is a 44-23 two-wheel drive or four-wheel drive?
The Fiat 44-23 is four-wheel drive (4WD).
What PTO does a 44-23 have?
A 44-23 has a independent 1000 rpm rear PTO on a 1 3/4"- 20 splined (Form-3) shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Fiat Fiat 44-23”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat Fiat 44-23 — CC BY-SA 4.0, WIKIBOOKS-TL-108727 · revision 990880. Wikibooks contributors (Traktorenlexikon). Original document