10 material differences · fewer than 12
Tractor oneCase-IH 92301990–1995No measured PTO figureTractor twoFiat 44-231979–1982No measured PTO figure
Which should you choose?
Read our verdict on the 9230 and the 44-23 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 9230 | 44-23 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 231.7 hp | 227.0 hp | — |
| Engine declared | CUMMINS 6 TA-830 | CUMMINS NT-855 C 230 | differs |
| Displacement declared | 8.27 L | 14.01 L | +69% 44-23 |
| Maximum torque declared | 628 lb·ft · 852 N·m | 811 lb·ft · 1,100 N·m | +29% 44-23 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 9230 |
| Clutch declared | — | Dry Dana-Spicer double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 29.0 gpm · 109.8 L/min | 23.6 gpm · 89.4 L/min | +23% 9230 |
| Pressure declared | 2,306 psi · 159 bar | 3,336–3,481 psi · 230–240 bar | differs |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 24,108 lb · 10,935 kg | 24,385 lb · 11,061 kg | — |
| Wheelbase declared | 120.4 in · 3,058 mm | 130.0 in · 3,302 mm | +8% 44-23 |
| Length declared | 252.4 in · 6,410 mm | 253.1 in · 6,430 mm | — |
| Width declared | 119.5–148.3 in · 3,035–3,767 mm | 99.6 in · 2,530 mm | differs |
| Ground clearance declared | 11.0 in · 280 mm | 16.5 in · 420 mm | +50% 44-23 |
| Turning radius, braked declared | 19.4 ft · 5.91 m | — | — |
| Fuel tank declared | 459.7 qt · 435.0 L | 739.7 qt · 700.0 L | +61% 44-23 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 9230 sources
- Source: Traktorenlexikon, “Case-IH 9230”
- Source: Traktorenlexikon, “Case-IH 7230 PRO/8930”
Fiat 44-23 sources
- Source: Traktorenlexikon, “Fiat Fiat 44-23”