Case-IH 9230 vs Case-IH 9330

5 material differences · fewer than 12

Tractor one

1990–1995

No measured PTO figure

Tractor two

1995–2000

No measured PTO figure

Which should you choose?

Read our verdict on the 9230 and the 9330 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

5 material differences · 12 fields identical or within 5%, which is not counted as material

Case-IH 9230 and Case-IH 9330, field by field
Field	9230	9330	Gap
Engine
Engine power, claimed claimed	231.7 hp	236.7 hp	—
Engine declared	CUMMINS 6 TA-830	CUMMINS 6 TA-830 A	differs
Displacement declared	8.27 L	8.27 L	—
Maximum torque declared	628 lb·ft · 852 N·m	754 lb·ft · 1,022 N·m	+20% 9330
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	Oil-immersed U.V.C. multi-plate clutch	—
Hydraulics & hitch
Pump flow declared	29.0 gpm · 109.8 L/min	28.7 gpm · 108.6 L/min	—
Pressure declared	2,306 psi · 159 bar	2,495 psi · 172 bar	+8% 9330
Three-point lift at ends declared	14,074 lb · 6,384 kg	15,984 lb · 7,250 kg	+14% 9330
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	24,108 lb · 10,935 kg	23,649 lb · 10,727 kg	—
Wheelbase declared	120.4 in · 3,058 mm	120.4 in · 3,058 mm	—
Length declared	252.4 in · 6,410 mm	252.4 in · 6,410 mm	—
Width declared	119.5 in · 3,035 mm	113.8 in · 2,890 mm	—
Height declared	129.1 in · 3,279 mm	128.7 in · 3,269 mm	—
Ground clearance declared	11.0 in · 280 mm	11.0 in · 280 mm	—
Turning radius, braked declared	19.4 ft · 5.91 m	12.8 ft · 3.90 m	+52% 9230
Fuel tank declared	459.7 qt · 435.0 L	459.7 qt · 435.0 L	—

Source

Source