• Rigid chassis
  • WhichTractor size: Standard-size
  • Lab tested ×1
  • 2002–2005

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

John Deere 8320 T Full specifications

John Deere-PowerTech 6.081 HRW-25 six-cylinder diesel or John Deere 6081HRW25. The manufacturer claimed 247 horsepower. The only laboratory test on record is of one version: OECD Test 2043 measured 246.6 hp at the PTO of the 8320T (Rubber tracklaying tractor).

Engine power, claimed · gross or net not stated

247 hp

184 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere 8320T”, claimed

Weight
26,735 lb
3-point lift
16,535 lb
Hyd. flow
34.6 gpm
Top speed
18.6 mph

John Deere 8320 T specs: key facts

  • The John Deere 8320 T was built from 2002 to 2005.

  • Only one version of the John Deere 8320 T has a laboratory test on record: the 8320T (Rubber tracklaying tractor) produced 183.9 kW (246.6 hp) at the PTO, measured on OECD Test 2043.Source 1

  • The John Deere 8320 T has a claimed engine power (gross or net not stated) of 184 kW (247 hp); it has no measured PTO figure.

  • The John Deere 8320 T is a tracked machine.Source 1

  • The John Deere 8320 T has a John Deere-PowerTech 6.081 HRW-25 engine, a 6-cylinder 8.13 L diesel unit.

  • The John Deere 8320 T weighs 12,127 kg (26,735 lb) unladen.

  • The John Deere 8320 T has an independent rear PTO running at 1000 rpm.

  • The three-point hitch of the John Deere 8320 T lifts 7,500 kg (16,535 lb) at the lower-link ends.

  • The hydraulic pump of the John Deere 8320 T delivers 131.0 L/min (34.6 gpm).

Source · Traktorenlexikon, “John Deere 8320T”

How much horsepower does an 8320 T have?

The only laboratory test on record is of one version. OECD Test 2043 measured 246.6 hp at the PTO of the 8320T (Rubber tracklaying tractor). For the 8320 T as a whole the figure is the 247 hp claimed for the engine, which is not power at the shaft.

Engine, claimed (gross/net not stated)
247 hp

Sources · Traktorenlexikon, “John Deere 8320T”; OECD test report 2043, 2003

What engine is in an 8320 T?

An 8320 T has a John Deere-PowerTech 6.081 HRW-25, a 6-cylinder 8.13 L diesel engine. 8320T (Rubber tracklaying tractor) tractors have a John Deere 6081HRW25.

Engine — 8320 T engine specifications
Make & modelJohn Deere-PowerTech 6.081 HRW-25
Cylinders6, liquid-cooled
Displacement496.4 ci · 8.13 L
Max torque780 lb·ft · 1,058 N·m @ 1,405 rpm
Electrical system12 V

Source · Traktorenlexikon, “John Deere 8320T”

How much will an 8320 T lift, and what is its hydraulic flow?

An 8320 T lifts 16,535 lb (7,500 kg) at the lower-link ends.

Hydraulics & PTO — 8320 T hydraulics and PTO specifications
SystemClosed centre, load sensingSource 1
Pump flow34.6 gpm · 131.0 L/min
Pressure2,944 psi · 203 bar
Lift at ends16,535 lb · 7,500 kg
Rear PTOIndependent, engine-driven, 1000 rpmEngages under load
PTO shaft1 3/4"- 20 teilig

Source · Traktorenlexikon, “John Deere 8320T”

What transmission does an 8320 T have?

Transmission specifications for the 8320 T are below.

Transmission — 8320 T transmission specifications
Clutchpedal-operated hydraulic wet John Deere multi-disc clutch
Brakespedal-operated hydraulic wet Vickers disc brake acting on differential side shafts
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “John Deere 8320T”

How much does an 8320 T weigh?

An 8320 T weighs 26,735 lb (12,127 kg) unladen.

Weights & dimensions — 8320 T weights and dimensions
Unladen weight26,735 lb · 12,127 kg
Maximum permissible mass31,500 lb · 14,288 kg
Wheelbase89.0 in · 2,260 mm
Length217.7 in · 5,530 mm
Width103.7 in · 2,634 mm
Height122.9 in · 3,122 mm
Ground clearance13.8 in · 350 mm
Front track88.0–119.5 in · 2,235–3,035 mmWikibooks gives one track for both axles
Rear track88.0–119.5 in · 2,235–3,035 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “John Deere 8320T”

How much fuel does an 8320 T burn per hour?

Measured on OECD Test 2043 (tested as the 8320T (Rubber tracklaying tractor)), at each condition the laboratory recorded.

Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).

Fuel use measured on OECD Test 2043
Test conditionFuel per hour
Maximum PTO powerPTO 183.9 kW (246.6 hp) at 917 rpm50.75 L/h 13.41 gal/h
Rated engine speedPTO 162.3 kW (217.6 hp) at 1,009 rpm48.69 L/h 12.86 gal/h
Standard PTO speedPTO 162.3 kW (217.6 hp) at 1,009 rpm48.69 L/h 12.86 gal/h
75% load, 50% loadNot on record for this test

Source · OECD Test 2043

Which tractors compare with an 8320 T?

Within 10% of its 247 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is an 8320 T two-wheel drive or four-wheel drive?

The John Deere 8320 T is a tracked machine.

What PTO does an 8320 T have?

An 8320 T has a independent 1000 rpm rear PTO on a 1 3/4"- 20 teilig shaft.

Where this page comes from

Compiled from OECD tractor test report 2043; and Traktorenlexikon, “John Deere 8320T”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/2 043: John Deere 8320T — Licence not stated by the publisher; facts cited, OECD-2043 · published 2003-02-06 · retrieved 2026-09-14. OECD. Original document
  2. Traktorenlexikon: John Deere 8320TCC BY-SA 4.0, WIKIBOOKS-TL-106544 · revision 880808. Wikibooks contributors (Traktorenlexikon). Original document