Case-IH 7150 Magnum vs Case-IH 7250 Magnum

5 material differences · fewer than 12

Tractor one

Case-IH 7150 Magnum

1990–1993

No measured PTO figure

Tractor two

Case-IH 7250 Magnum

1994–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 7150 Magnum and the 7250 Magnum → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

5 material differences · 13 fields identical or within 5%, which is not counted as material

Case-IH 7150 Magnum and Case-IH 7250 Magnum, field by field
Field7150 Magnum7250 MagnumGap
Engine
Engine power, claimed claimed244 hp245.5 hp
Engine declaredCUMMINS 6 TA-830CUMMINS 6 TA-830
Displacement declared8.27 L8.27 L
Maximum torque declared691 lb·ft · 937 N·m717 lb·ft · 972 N·m
Transmission
Top speed declared18.6 mph · 30 km/h18.6–24.9 mph · 30–40 km/hdiffers
Clutch declaredoil-immersed multi-plate clutchCase-IH multi-plate clutch running in oil bathdiffers
Hydraulics & hitch
Pump flow declared24.8 gpm · 93.8 L/min28.9 gpm · 109.4 L/min+17% 7250 Magnum
Pressure declared2,451 psi · 169 bar2,451 psi · 169 bar
Three-point lift at ends declared15,961 lb · 7,240 kg20,637 lb · 9,361 kg+29% 7250 Magnum
Rear PTO speeds declared1000 rpm1000 rpm
Weight & dimensions
Unladen weight declared18,587 lb · 8,431 kg18,140 lb · 8,228 kg
Maximum permissible mass declared25,519 lb · 11,575 kg25,519 lb · 11,575 kg
Wheelbase declared118.3 in · 3,006 mm118.3 in · 3,006 mm
Length declared207.8 in · 5,278 mm200.4 in · 5,090 mm
Width declared120.0 in · 3,048 mm120.0 in · 3,048 mm
Height declared121.1 in · 3,077 mm121.1 in · 3,077 mm
Ground clearance declared17.3 in · 440 mm19.3 in · 489 mm+11% 7250 Magnum
Fuel tank declared379.4 qt · 359.0 L379.4 qt · 359.0 L

Case-IH 7150 Magnum sources

Source
  • Source: Traktorenlexikon, “Case-IH 7150”
  • Source: Traktorenlexikon, “Case-IH 7230 PRO/8930”

Case-IH 7250 Magnum sources

Source
  • Source: Traktorenlexikon, “Case-IH 7250”
  • Source: Traktorenlexikon, “Case-IH 7230 PRO/8930”