- Vehicle type: unspecified
- Orchard & vineyard, Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1980–1986
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
AGRIFULL 80-60 F (DT) Full specifications
FIAT-IVECO 8035.00 three-cylinder diesel. The manufacturer claimed 54.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
54.3 hp
40.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Agrifull 80-60 F”, claimed
- Weight
- 4,751 lb
- Hyd. flow
- 5.8 gpm
- Top speed
- 15.5 mph
AGRIFULL 80-60 F (DT) specs: key facts
The AGRIFULL 80-60 F (DT) was built from 1980 to 1986.
The AGRIFULL 80-60 F (DT) has a claimed engine power (gross or net not stated) of 40.5 kW (54.3 hp); it has no measured PTO figure.
The AGRIFULL 80-60 F (DT) was offered in two-wheel-drive and four-wheel-drive versions.
The AGRIFULL 80-60 F (DT) has a FIAT-IVECO 8035.00 engine, a 3-cylinder 2.59 L diesel unit.
The AGRIFULL 80-60 F (DT) weighs 2,155 kg (4,751 lb) unladen.
The AGRIFULL 80-60 F (DT) has an independent rear PTO running at 540/1000 rpm.
The hydraulic pump of the AGRIFULL 80-60 F (DT) delivers 22.0 L/min (5.8 gpm).
Source · Traktorenlexikon, “Agrifull 80-60 F”
How much horsepower does an 80-60 F (DT) have?
The only figure for the 80-60 F (DT) is 54.3 hp (40.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Agrifull 80-60 F”
What engine is in an 80-60 F (DT)?
An 80-60 F (DT) has a FIAT-IVECO 8035.00, a 3-cylinder 2.59 L diesel engine.
| Make & model | FIAT-IVECO 8035.00 |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 158.2 ci · 2.59 L |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Agrifull 80-60 F”
How much will an 80-60 F (DT) lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 80-60 F (DT) are below.
| Pump flow | 5.8 gpm · 22.0 L/min |
|---|---|
| Pressure | 3,118 psi · 215 bar |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 2,227 engine rpmEngages under loadGround-speed PTO available |
| PTO shaft | 1 3/8"- 6 splines or 1 3/8"- 21 parts |
Source · Traktorenlexikon, “Agrifull 80-60 F”
What transmission does an 80-60 F (DT) have?
Transmission specifications for the 80-60 F (DT) are below.
| Steering | Hydrostatic steering with double-acting steering cylinders |
|---|---|
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “Agrifull 80-60 F”
How much does an 80-60 F (DT) weigh?
An 80-60 F (DT) weighs 4,751 lb (2,155 kg) unladen.
| Unladen weight | 4,751 lb · 2,155 kgDT: 2,250 |
|---|---|
| Wheelbase | 74.8 in · 1,900 mmDT: 2,020 |
| Length | 136.6 in · 3,470 mm |
| Width | 53.9 in · 1,370 mm |
| Height | 58.7 in · 1,490 mm |
| Ground clearance | 15.0 in · 380 mmDT: 280 |
| Front track | 46.5–62.2 in · 1,180–1,580 mmDT: 1,140-1,230 |
| Rear track | 39.0–62.6 in · 990–1,590 mm |
Source · Traktorenlexikon, “Agrifull 80-60 F”
Which tractors compare with an 80-60 F (DT)?
Within 10% of its 54.3 hp of claimed engine power, the same type, and first built within 15 years of it.
Everything else people ask
Is an 80-60 F (DT) two-wheel drive or four-wheel drive?
The AGRIFULL 80-60 F (DT) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does an 80-60 F (DT) have?
An 80-60 F (DT) has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/8"- 21 parts shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Agrifull 80-60 F”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Agrifull 80-60 F — CC BY-SA 4.0, WIKIBOOKS-TL-122087 · revision 1078915. Wikibooks contributors (Traktorenlexikon). Original document