10 material differences · fewer than 12
Tractor oneAGRIFULL 80-60 F (DT)1980–1986No measured PTO figureTractor twoRenault 55-12 F1986–1998No measured PTO figure
Which should you choose?
Read our verdict on the 80-60 F (DT) and the 55-12 F → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 80-60 F (DT) | 55-12 F | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 54.3 hp | 51.4 hp | +6% 80-60 F (DT) |
| Engine declared | FIAT-IVECO 8035.00 | KLÖCKNER-HUMBOLDT-DEUTZ F3L 912 | differs |
| Displacement declared | 2.59 L | 2.83 L | +9% 55-12 F |
| Maximum torque declared | — | 121 lb·ft · 164 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 55-12 F |
| Clutch declared | — | dry OMG double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | 11.1 gpm · 42.2 L/min | +92% 55-12 F |
| Pressure declared | 3,118 psi · 215 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,751 lb · 2,155 kg | 4,156 lb · 1,885 kg | +14% 80-60 F (DT) |
| Wheelbase declared | 74.8 in · 1,900 mm | 78.0 in · 1,980 mm | — |
| Length declared | 136.6 in · 3,470 mm | 129.3 in · 3,285 mm | +6% 80-60 F (DT) |
| Width declared | 53.9–77.6 in · 1,370–1,970 mm | 47.2 in · 1,200 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 12.2 in · 310 mm | +23% 80-60 F (DT) |
| Fuel tank declared | 52.8 qt · 50.0 L | 65.5 qt · 62.0 L | +24% 55-12 F |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 80-60 F (DT) sources
- Source: Traktorenlexikon, “Agrifull 80-60 F”
Renault 55-12 F sources
- Source: Traktorenlexikon, “Renault 55-12 F R3246”
- Source: Traktorenlexikon, “Renault 50-12 V R3215”