7 material differences · fewer than 12
Tractor oneAGRIFULL 80-60 F (DT)1980–1986No measured PTO figureTractor twoFendt Farmer 203 V/VA-II1984–1988No measured PTO figure
Which should you choose?
Read our verdict on the 80-60 F (DT) and the Farmer 203 V/VA-II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 80-60 F (DT) | Farmer 203 V/VA-II | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 54.3 hp | 56 hp | — |
| Engine declared | FIAT-IVECO 8035.00 | — | — |
| Displacement declared | 2.59 L | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% Farmer 203 V/VA-II |
| Clutch declared | — | Independent dual clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 5.8 gpm · 22.0 L/min | 7.1 gpm · 27.0 L/min | +23% Farmer 203 V/VA-II |
| Pressure declared | 3,118 psi · 215 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,751 lb · 2,155 kg | 3,781 lb · 1,715 kg | +26% 80-60 F (DT) |
| Maximum permissible mass declared | — | 6,614 lb · 3,000 kg | — |
| Wheelbase declared | 74.8 in · 1,900 mm | 75.5 in · 1,918 mm | — |
| Length declared | 136.6 in · 3,470 mm | 131.9 in · 3,350 mm | — |
| Width declared | 53.9–77.6 in · 1,370–1,970 mm | 37.1 in · 943 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 12.2 in · 310 mm | +23% 80-60 F (DT) |
| Turning radius, braked declared | — | 8.9 ft · 2.70 m | — |
| Fuel tank declared | 52.8 qt · 50.0 L | 67.6 qt · 64 L | +28% Farmer 203 V/VA-II |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL 80-60 F (DT) sources
- Source: Traktorenlexikon, “Agrifull 80-60 F”
Fendt Farmer 203 V/VA-II sources
- Source: Traktorenlexikon, “Fendt Farmer 203 V/VA-II”