- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1993–1995
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
AGCO-ALLIS 9630 Full specifications
K.H.D. BF6L 913 C six-cylinder diesel. The manufacturer claimed 133.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
133.2 hp
99.3 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO-Allis 9630”, claimed
- Weight
- 14,802 lb
- 3-point lift
- 6,962 lb
- Hyd. flow
- 22.6 gpm
- Top speed
- 24.9 mph
AGCO-ALLIS 9630 specs: key facts
The AGCO-ALLIS 9630 was built from 1993 to 1995.
The AGCO-ALLIS 9630 has a claimed engine power (gross or net not stated) of 99.3 kW (133.2 hp); it has no measured PTO figure.
The AGCO-ALLIS 9630 was offered in two-wheel-drive and four-wheel-drive versions.
The AGCO-ALLIS 9630 has a K.H.D. BF6L 913 C engine, a 6-cylinder 6.13 L diesel unit.
The AGCO-ALLIS 9630 weighs 6,714 kg (14,802 lb) unladen.
The AGCO-ALLIS 9630 has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the AGCO-ALLIS 9630 lifts 3,158 kg (6,962 lb) at the lower-link ends.
The hydraulic pump of the AGCO-ALLIS 9630 delivers 85.6 L/min (22.6 gpm).
Source · Traktorenlexikon, “AGCO-Allis 9630”
How much horsepower does a 9630 have?
The only figure for the 9630 is 133.2 hp (99.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “AGCO-Allis 9630”
What engine is in a 9630?
A 9630 has a K.H.D. BF6L 913 C, a 6-cylinder 6.13 L diesel engine.
| Make & model | K.H.D. BF6L 913 C |
|---|---|
| Cylinders | 6, air-cooled |
| Displacement | 374.0 ci · 6.13 L |
| Max torque | 393 lb·ft · 533 N·m @ 1,599 rpm |
Source · Traktorenlexikon, “AGCO-Allis 9630”
How much will a 9630 lift, and what is its hydraulic flow?
A 9630 lifts 6,962 lb (3,158 kg) at the lower-link ends.
| System | Closed centre |
|---|---|
| Pump flow | 22.6 gpm · 85.6 L/min |
| Lift at ends | 6,962 lb · 3,158 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 2,227 engine rpm |
| PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 part |
Source · Traktorenlexikon, “AGCO-Allis 9630”
What transmission does a 9630 have?
Transmission specifications for the 9630 are below.
| Clutch | Hydraulically operated wet Funk multi-disc clutch |
|---|---|
| Steering | Hydrostatic Eaton steering |
| Top speed | 24.9 mph · 40 km/h |
Source · Traktorenlexikon, “AGCO-Allis 9630”
How much does a 9630 weigh?
A 9630 weighs 14,802 lb (6,714 kg) unladen.
| Unladen weight | 14,802 lb · 6,714 kg4 WD: 7,303 kg |
|---|---|
| Wheelbase | 123.2 in · 3,129 mm4 WD: 2,959 |
| Length | 187.5 in · 4,762 mm |
| Width | 96.0 in · 2,438 mm |
| Height | 123.5 in · 3,137 mm |
| Ground clearance | 23.0 in · 584 mm4 WD: 572 |
| Front track | 65.0–89.0 in · 1,651–2,261 mm1,516-2,322 |
| Rear track | 62.0–107.1 in · 1,575–2,720 mm |
| Turning radius, braked | 13.8 ft · 4.20 m4 WD: 4,500 |
Source · Traktorenlexikon, “AGCO-Allis 9630”
Which tractors compare with a 9630?
Within 10% of its 133.2 hp of claimed engine power, the same type, and first built within 15 years of it.
- New Holland 8360 A133.2 hp engine, claimed · 1996–1999Side by side with the 9630 →
- VALMET 8350133.2 hp engine, claimed · 1998–2004Side by side with the 9630 →
- Agco RT-135133.2 hp engine, claimed · 2004–2005Side by side with the 9630 →
- Lamborghini R-1356 DT133.2 hp engine, claimed · 1980–1984Side by side with the 9630 →
- SOMECA 1380 (TD)133.2 hp engine, claimed · 1979–1983Side by side with the 9630 →
- Massey Ferguson MF 8110 A133.3 hp engine, claimed · 1995–1999Side by side with the 9630 →
Everything else people ask
Is a 9630 two-wheel drive or four-wheel drive?
The AGCO-ALLIS 9630 was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 9630 have?
A 9630 has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 part shaft.
Where this page comes from
Compiled from Traktorenlexikon, “AGCO-Allis 9630”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO-Allis 9630 — CC BY-SA 4.0, WIKIBOOKS-TL-122847 · revision 1087403. Wikibooks contributors (Traktorenlexikon). Original document