10 material differences · fewer than 12

Tractor oneAGCO-ALLIS 96301993–1995No measured PTO figureTractor twoHürlimann SX 13501998–2004No measured PTO figure

Which should you choose?

Read our verdict on the 9630 and the SX 1350 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9630 and Hürlimann SX 1350, field by field
Field	9630	SX 1350	Gap
Engine
Engine power, claimed claimed	133.2 hp	133.2 hp	—
Engine declared	K.H.D. BF6L 913 C	SAME-DEUTZ-FAHR 1000.6 WT-3 V1	differs
Displacement declared	6.13 L	6.00 L	—
Maximum torque declared	393 lb·ft · 533 N·m	358 lb·ft · 485 N·m	+10% 9630
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Hydraulically operated wet Funk multi-disc clutch	Hydraulic wet multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	22.6 gpm · 85.6 L/min	28.8 gpm · 109.0 L/min	+27% SX 1350
Pressure declared	—	3,046 psi · 210 bar	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,802 lb · 6,714 kg	14,771 lb · 6,700 kg	—
Maximum permissible mass declared	—	23,149 lb · 10,500 kg	—
Wheelbase declared	123.2 in · 3,129 mm	108.3 in · 2,750 mm	+14% 9630
Length declared	187.5 in · 4,762 mm	170.1 in · 4,320 mm	+10% 9630
Width declared	96.0–135.2 in · 2,438–3,435 mm	96.5–112.6 in · 2,450–2,860 mm	differs
Height, over the cab declared	123.5 in · 3,137 mm	113.4 in · 2,880 mm	+9% 9630
Ground clearance declared	23.0 in · 584 mm	20.5 in · 520 mm	+12% 9630
Turning radius, braked declared	13.8 ft · 4.20 m	—	—
Fuel tank declared	267.9 qt · 253.5 L	243.0–401.5 qt · 230.0–380.0 L	differs

Source

Source