AGCO-ALLIS 9630 vs VALMET 8350

13 material differences

Tractor one

1993–1995

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 9630 and the 8350 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9630 and VALMET 8350, field by field
Field	9630	8350	Gap
Engine
Engine power, claimed claimed	133.2 hp	133.2 hp	—
Engine declared	K.H.D. BF6L 913 C	VALMET 620 DSRIE	differs
Displacement declared	6.13 L	6.59 L	+8% 8350
Maximum torque declared	393 lb·ft · 533 N·m	471 lb·ft · 639 N·m	+20% 8350
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	Hydraulically operated wet Funk multi-disc clutch	pedal-operated dry Fichtel & Sachs single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	22.6 gpm · 85.6 L/min	20.2 gpm · 76.4 L/min	+12% 9630
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	6,962 lb · 3,158 kg	14,991 lb · 6,800 kg	+115% 8350
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	14,802 lb · 6,714 kg	14,308 lb · 6,490 kg	—
Maximum permissible mass declared	—	19,842 lb · 9,000 kg	—
Wheelbase declared	123.2 in · 3,129 mm	100.7 in · 2,558 mm	+22% 9630
Length declared	187.5 in · 4,762 mm	225.2 in · 5,720 mm	+20% 8350
Width declared	96.0 in · 2,438 mm	84.8 in · 2,155 mm	+13% 9630
Height declared	123.5 in · 3,137 mm	111.2 in · 2,825 mm	+11% 9630
Ground clearance declared	23.0 in · 584 mm	18.1 in · 460 mm	+27% 9630
Turning radius, braked declared	13.8 ft · 4.20 m	—	—
Fuel tank declared	267.9 qt · 253.5 L	174.4 qt · 165.0 L	+54% 9630

Source

Source