• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1976–1980

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

WHITE 2-50 Full specifications

FIAT-IVECO 8035.02.300 three-cylinder diesel. The manufacturer claimed 47.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

47.3 hp

35.3 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “White 2-50”, claimed

Weight
4,098 lb
Hyd. flow
6.0 gpm
Top speed
18.6 mph

WHITE 2-50 specs: key facts

  • The WHITE 2-50 was built from 1976 to 1980.

  • The WHITE 2-50 has a claimed engine power (gross or net not stated) of 35.3 kW (47.3 hp); it has no measured PTO figure.

  • The WHITE 2-50 was offered in two-wheel-drive and four-wheel-drive versions.

  • The WHITE 2-50 has a FIAT-IVECO 8035.02.300 engine, a 3-cylinder 2.59 L diesel unit.

  • The WHITE 2-50 weighs 1,859 kg (4,098 lb) unladen.

  • The WHITE 2-50 has an independent rear PTO running at 540 rpm.

  • The hydraulic pump of the WHITE 2-50 delivers 22.7 L/min (6.0 gpm).

Source · Traktorenlexikon, “White 2-50”

How much horsepower does a 2-50 have?

The only figure for the 2-50 is 47.3 hp (35.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
47.3 hp

Source · Traktorenlexikon, “White 2-50”

What engine is in a 2-50?

A 2-50 has a FIAT-IVECO 8035.02.300, a 3-cylinder 2.59 L diesel engine.

Engine — 2-50 engine specifications
Make & modelFIAT-IVECO 8035.02.300
Cylinders3, liquid-cooled
Displacement158.2 ci · 2.59 L
Max torque112 lb·ft · 152 N·m @ 1,600 rpm
Injectiondirect injection
Electrical system12 V

Source · Traktorenlexikon, “White 2-50”

How much will a 2-50 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 2-50 are below.

Hydraulics & PTO — 2-50 hydraulics and PTO specifications
Pump flow6.0 gpm · 22.7 L/min
Pressure2,843 psi · 196 bar
Rear PTOIndependent, engine-driven, 540 rpm @ 2,159 engine rpmGround-speed PTO available

Source · Traktorenlexikon, “White 2-50”

What transmission does a 2-50 have?

Transmission specifications for the 2-50 are below.

Transmission — 2-50 transmission specifications
ClutchDry double clutch
SteeringMechanically operated GEMMER steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “White 2-50”

How much does a 2-50 weigh?

A 2-50 weighs 4,098 lb (1,859 kg) unladen.

Weights & dimensions — 2-50 weights and dimensions
Unladen weight4,098 lb · 1,859 kg4 WD: 1,927
Wheelbase75.6 in · 1,921 mm4 WD: 1,981
Length116.3 in · 2,953 mm
Width63.0 in · 1,600 mm
Height60.4 in · 1,534 mm
Ground clearance17.0 in · 432 mm4 WD: 381
Front track48.0–76.0 in · 1,219–1,930 mm4 WD: 1,397/1,499; the article lists alternatives
Rear track52.0–80.0 in · 1,321–2,032 mm
Turning radius, braked10.2 ft · 3.10 m4 WD: 4,400

Source · Traktorenlexikon, “White 2-50”

Which tractors compare with a 2-50?

Within 10% of its 47.3 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 2-50 two-wheel drive or four-wheel drive?

The WHITE 2-50 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 2-50 have?

A 2-50 has a independent 540 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “White 2-50”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: White 2-50CC BY-SA 4.0, WIKIBOOKS-TL-122157 · revision 1079673. Wikibooks contributors (Traktorenlexikon). Original document