- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1976–1980
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
WHITE 2-50 Hydraulics & PTO specifications
10 hydraulics and PTO values on record for the 2-50.
Engine power, claimed · gross or net not stated
47.3 hp
35.3 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “White 2-50”, claimed
What hydraulics does a 2-50 have?
Hydraulic and hitch specifications for the 2-50 are below.
| Pump flow | 6.0 gpm · 22.7 L/min |
|---|---|
| Hydraulic pressure | 2,843 psi · 196 bar |
| Rear remote valves | 1 |
| Lift capacity 610 mm behind ends | 2,099 lb · 952 kg |
| Hitch control | Lifting, lowering, floating position and draft and position control |
Source · Traktorenlexikon, “White 2-50”
What PTO does a 2-50 have?
A 2-50 has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 2,159 rpm |
Source · Traktorenlexikon, “White 2-50”
Where this page comes from
10 hydraulics and PTO values from Traktorenlexikon, “White 2-50”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: White 2-50 — CC BY-SA 4.0, WIKIBOOKS-TL-122157 · revision 1079673. Wikibooks contributors (Traktorenlexikon). Original document