WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1991–1994

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

VALMET 6100-4 specs: hp, weight, years

VALMET 320 DS three-cylinder diesel. The manufacturer claimed 77.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

77.9 hp

58.1 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Valmet 6100”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
8,818 lb
3-point lift
9,601 lb
Hyd. flow
21.2 gpm
Top speed
18.6–24.9 mph

VALMET 6100-4 specs: key facts

  • The VALMET 6100-4 was built from 1991 to 1994.

  • The VALMET 6100-4 has a claimed engine power (gross or net not stated) of 58.1 kW (77.9 hp); it has no measured PTO figure.

  • The VALMET 6100-4 is four-wheel drive (4WD).

  • The VALMET 6100-4 has a VALMET 320 DS engine, a 3-cylinder 3.30 L diesel unit.Source 1

  • The VALMET 6100-4 weighs 4,000 kg (8,818 lb) unladen.

  • The VALMET 6100-4 has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the VALMET 6100-4 lifts 4,355 kg (9,601 lb) at the lower-link ends.

  • The hydraulic pump of the VALMET 6100-4 delivers 80.3 L/min (21.2 gpm).

Source · Traktorenlexikon, “Valmet 6100”

How does the 6100-4 compare with its class?

  • Strength:

    A hydraulic pump flow of 80.3 L/min is high for its class — 84% above the median of 43.7 L/min across the 298 machines within 10% of its power that hold this figure.

  • Strength:

    A 158 L fuel tank is high for its class — 67% above the median of 94.6 L across the 349 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 377 comparable records. How we work this out

Illustration of the 1991–1994 VALMET 6100-4, a 78 hp farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does a 6100-4 have?

The only figure for the 6100-4 is 77.9 hp (58.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
77.9 hp

Source · Traktorenlexikon, “Valmet 6100”

What engine is in a 6100-4?

A 6100-4 has a VALMET 320 DS, a 3-cylinder 3.30 L diesel engine.

Engine — 6100-4 engine specifications
Make & modelVALMET 320 DSSource 1
Cylinders3, liquid-cooledSource 1
Displacement201.3 ci · 3.30 LSource 1
Max torque229 lb·ft · 310 N·m @ 1,550 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Valmet 6100”

How much will a 6100-4 lift, and what is its hydraulic flow?

A 6100-4 lifts 9,601 lb (4,355 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 6100-4 hydraulics and PTO specifications
Pump flow21.2 gpm · 80.3 L/min
Pressure2,031–2,248 psi · 140–155 bar
Hitch categoryCategory 2
Lift at ends9,601 lb · 4,355 kg
Rear PTO540/1000 rpm @ 1,874 engine rpm

Source · Traktorenlexikon, “Valmet 6100”

What transmission does a 6100-4 have?

Transmission specifications for the 6100-4 are below.

Transmission — 6100-4 transmission specifications
ClutchPedal-operated, dry Fichtel & Sachs single-plate clutch
BrakesPedal-operated wet Valmet multi-disc brake acting on differential side shafts
SteeringHydrostatic Danfoss steering
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Valmet 6100”

How much does a 6100-4 weigh?

A 6100-4 weighs 8,818 lb (4,000 kg) unladen.

Weights & dimensions — 6100-4 weights and dimensions
Unladen weight8,818 lb · 4,000 kg
Maximum permissible mass13,889 lb · 6,300 kg
Wheelbase90.6 in · 2,302 mm
Length169.1 in · 4,295 mm
Width85.2 in · 2,165 mm
Height106.1 in · 2,695 mm
Ground clearance16.1 in · 410 mm
Front track58.7–78.5 in · 1,490–1,995 mm
Rear track59.4–83.1 in · 1,510–2,110 mm
Turning radius, braked13.1 ft · 4.00 m

Source · Traktorenlexikon, “Valmet 6100”

What oil does a 6100-4 take, and how much?

A 6100-4 engine takes 13.7 qt (13.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

6100-4 fluid capacities, grades and service intervals
SystemCapacity
Engine oil13.7 qt · 13.0 LSource: Traktorenlexikon, “Valmet 6100” · single source, not independently verified
Transmission & hydraulic45.4 qt · 43.0 LSource: Traktorenlexikon, “Valmet 6100” · single source, not independently verified
Cooling system16.4 qt · 15.5 LSource: Traktorenlexikon, “Valmet 6100” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 6100-4?

Within 10% of its 77.9 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the VALMET 6100-4

Is a 6100-4 two-wheel drive or four-wheel drive?

The VALMET 6100-4 is four-wheel drive (4WD).

What PTO does a 6100-4 have?

A 6100-4 has a 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Valmet 465”; and Traktorenlexikon, “Valmet 6100”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Valmet 465 — CC BY-SA 4.0, WIKIBOOKS-TL-116427 · revision 998452. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Valmet 6100 — CC BY-SA 4.0, WIKIBOOKS-TL-116458 · revision 1023840. Wikibooks contributors (Traktorenlexikon). Original document