WhichTractor
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1986–1987

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

VALMET 2105-4 Full specifications

VOLVO TD 60 K six-cylinder diesel. The manufacturer claimed 160.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

160.8 hp

119.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Valmet 2105”, claimed

Weight
14,099 lb
3-point lift
10,543 lb
Hyd. flow
16.1 gpm
Top speed
18.6 mph

VALMET 2105-4 specs: key facts

  • The VALMET 2105-4 was built from 1986 to 1987.

  • The VALMET 2105-4 has a claimed engine power (gross or net not stated) of 119.9 kW (160.8 hp); it has no measured PTO figure.

  • The VALMET 2105-4 is four-wheel drive (4WD).

  • The VALMET 2105-4 has a VOLVO TD 60 K engine, a 6-cylinder 5.48 L diesel unit.

  • The VALMET 2105-4 weighs 6,395 kg (14,099 lb) unladen.

  • The VALMET 2105-4 has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the VALMET 2105-4 lifts 4,782 kg (10,543 lb) at the lower-link ends.

  • The hydraulic pump of the VALMET 2105-4 delivers 61.0 L/min (16.1 gpm).

Source · Traktorenlexikon, “Valmet 2105”

How much horsepower does a 2105-4 have?

The only figure for the 2105-4 is 160.8 hp (119.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
160.8 hp

Source · Traktorenlexikon, “Valmet 2105”

What engine is in a 2105-4?

A 2105-4 has a VOLVO TD 60 K, a 6-cylinder 5.48 L diesel engine.

Engine — 2105-4 engine specifications
Make & modelVOLVO TD 60 K
Cylinders6, liquid-cooled
Displacement334.1 ci · 5.48 L
Max torque395 lb·ft · 536 N·m @ 1,699 rpm
Electrical system12 V

Source · Traktorenlexikon, “Valmet 2105”

How much will a 2105-4 lift, and what is its hydraulic flow?

A 2105-4 lifts 10,543 lb (4,782 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 2105-4 hydraulics and PTO specifications
Pump flow16.1 gpm · 61.0 L/min
Pressure1,813 psi · 125 bar
Hitch categoryCategory 2
Lift at ends10,543 lb · 4,782 kg
Rear PTO540/1000 rpm @ 2,067 engine rpm

Source · Traktorenlexikon, “Valmet 2105”

What transmission does a 2105-4 have?

Transmission specifications for the 2105-4 are below.

Transmission — 2105-4 transmission specifications
ClutchPedal-operated, dry Automotive single-disc clutch
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Valmet 2105”

How much does a 2105-4 weigh?

A 2105-4 weighs 14,099 lb (6,395 kg) unladen.

Weights & dimensions — 2105-4 weights and dimensions
Unladen weight14,099 lb · 6,395 kg
Maximum permissible mass18,905 lb · 8,575 kg
Wheelbase112.0 in · 2,845 mm
Length185.8 in · 4,720 mm
Width96.1 in · 2,440 mm
Height122.0 in · 3,100 mm
Ground clearance12.4 in · 315 mm
Front track65.7–83.5 in · 1,670–2,120 mm
Rear track71.7–83.5 in · 1,820–2,120 mm
Turning radius, braked14.8 ft · 4.52 m

Source · Traktorenlexikon, “Valmet 2105”

Which tractors compare with a 2105-4?

Within 10% of its 160.8 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 2105-4 two-wheel drive or four-wheel drive?

The VALMET 2105-4 is four-wheel drive (4WD).

What PTO does a 2105-4 have?

A 2105-4 has a 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Valmet 2105”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Valmet 2105 — CC BY-SA 4.0, WIKIBOOKS-TL-116401 · revision 998081. Wikibooks contributors (Traktorenlexikon). Original document