Hürlimann H-6165 Master vs VALMET 2105-4

11 material differences · fewer than 12

Tractor one

1991–2001

No measured PTO figure

Tractor two

1986–1987

No measured PTO figure

Which should you choose?

Read our verdict on the H-6165 Master and the 2105-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Hürlimann H-6165 Master and VALMET 2105-4, field by field
Field	H-6165 Master	2105-4	Gap
Engine
Engine power, claimed claimed	161.7 hp	160.8 hp	—
Engine declared	SAME-LAMBORGHINI-HÜRLIMANN 1000.6 WTI	VOLVO TD 60 K	differs
Displacement declared	6.00 L	5.48 L	+10% H-6165 Master
Maximum torque declared	467 lb·ft · 633 N·m	395 lb·ft · 536 N·m	+18% H-6165 Master
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6 mph · 30 km/h	+33% H-6165 Master
Clutch declared	—	Pedal-operated, dry Automotive single-disc clutch	—
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	15.2 gpm · 57.5 L/min	16.1 gpm · 61.0 L/min	+6% 2105-4
Pressure declared	—	1,813 psi · 125 bar	—
Three-point lift at ends declared	—	10,543 lb · 4,782 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,853 lb · 5,830 kg	14,099 lb · 6,395 kg	+10% 2105-4
Maximum permissible mass declared	18,739 lb · 8,500 kg	18,905 lb · 8,575 kg	—
Wheelbase declared	112.2 in · 2,850 mm	112.0 in · 2,845 mm	—
Length declared	187.0 in · 4,750 mm	185.8 in · 4,720 mm	—
Width declared	88.2 in · 2,240 mm	96.1 in · 2,440 mm	+9% 2105-4
Height declared	113.4 in · 2,880 mm	122.0 in · 3,100 mm	+8% 2105-4
Ground clearance declared	20.3 in · 515 mm	12.4 in · 315 mm	+63% H-6165 Master
Turning radius, braked declared	12.8 ft · 3.90 m	14.8 ft · 4.52 m	+16% 2105-4
Fuel tank declared	243.0 qt · 230.0 L	221.9 qt · 210.0 L	+10% H-6165 Master

Source

Source