- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1978–1984
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Steyr 8120 (a) Full specifications
Steyr WD-611.85 six-cylinder diesel. The manufacturer claimed 98.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
98.7 hp
73.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 8120”, claimed
- Weight
- 8,477 lb
- 3-point lift
- 8,957 lb
- Hyd. flow
- 9.4 gpm
- Top speed
- 15.5–18.6 mph
Steyr 8120 (a) specs: key facts
The Steyr 8120 (a) was built from 1978 to 1984.
The Steyr 8120 (a) has a claimed engine power (gross or net not stated) of 73.6 kW (98.7 hp); it has no measured PTO figure.
The Steyr 8120 (a) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Steyr 8120 (a) has a Steyr WD-611.85 engine, a 6-cylinder 5.18 L diesel unit.
The Steyr 8120 (a) weighs 3,845 kg (8,477 lb) unladen.
The Steyr 8120 (a) has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Steyr 8120 (a) lifts 4,063 kg (8,957 lb) at the lower-link ends.
The hydraulic pump of the Steyr 8120 (a) delivers 35.5 L/min (9.4 gpm).
Source · Traktorenlexikon, “Steyr 8120”
How much horsepower does an 8120 (a) have?
The only figure for the 8120 (a) is 98.7 hp (73.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Steyr 8120”
What engine is in an 8120 (a)?
An 8120 (a) has a Steyr WD-611.85, a 6-cylinder 5.18 L diesel engine.
| Make & model | Steyr WD-611.85 |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 316.3 ci · 5.18 L |
| Max torque | 267 lb·ft · 362 N·m @ 1,300 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Steyr 8120”
How much will an 8120 (a) lift, and what is its hydraulic flow?
An 8120 (a) lifts 8,957 lb (4,063 kg) at the lower-link ends.
| Pump flow | 9.4 gpm · 35.5 L/min |
|---|---|
| Pressure | 3,553 psi · 245 bar |
| Lift at ends | 8,957 lb · 4,063 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 2,057 engine rpmEngages under load |
Source · Traktorenlexikon, “Steyr 8120”
What transmission does an 8120 (a) have?
Transmission specifications for the 8120 (a) are below.
| Clutch | Dry Fichtel & Sachs single-disc clutch |
|---|---|
| Steering | Hydrostatic ZF steering with separate oil circuit |
| Top speed | 15.5–18.6 mph · 25–30 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Steyr 8120”
How much does an 8120 (a) weigh?
An 8120 (a) weighs 8,477 lb (3,845 kg) unladen.
| Unladen weight | 8,477 lb · 3,845 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 98.8 in · 2,509 mm2,540 |
| Length | 163.0 in · 4,140 mmtwo-wheel-drive version |
| Width | 84.3 in · 2,140 mm |
| Height | 102.2 in · 2,595 mm |
| Ground clearance | 17.3 in · 440 mmtwo-wheel-drive version |
| Front track | 58.2–81.8 in · 1,478–2,078 mmtwo-wheel-drive version |
| Rear track | 65.1–75.2 in · 1,654–1,910 mmthe article lists alternatives |
| Turning radius, braked | 13.8 ft · 4.20 mtwo-wheel-drive version |
Source · Traktorenlexikon, “Steyr 8120”
Which tractors compare with an 8120 (a)?
Within 10% of its 89.8 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- VALMET 903/903-489.8 hp PTO, claimed · 1979–1983Side by side with the 8120 (a) →
- Landini 10.000 (DT)90.1 hp PTO, claimed · 1978–1993Side by side with the 8120 (a) →
- Fiat 1000 Super (DT)91 hp PTO, claimed · 1976–1979Side by side with the 8120 (a) →
- Fiat 1000 Super (TD)90.7 hp PTO, claimed · 1976–1979Side by side with the 8120 (a) →
- SOMECA 1000 Super (TD)90.7 hp PTO, claimed · 1976–1979Side by side with the 8120 (a) →
- Case-IH 5230 (DT)90.8 hp PTO, claimed · 1989–1997Side by side with the 8120 (a) →
Everything else people ask
Is an 8120 (a) two-wheel drive or four-wheel drive?
The Steyr 8120 (a) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an 8120 (a) have?
An 8120 (a) has a independent 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Steyr 8120”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 8120 — CC BY-SA 4.0, WIKIBOOKS-TL-72599 · revision 1015106. Wikibooks contributors (Traktorenlexikon). Original document