12 material differences
Tractor oneJohn Deere 3350 (A)1986–1993No measured PTO figureTractor twoSteyr 8120 (a)1978–1984No measured PTO figure
Which should you choose?
Read our verdict on the 3350 (A) and the 8120 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 3350 (A) | 8120 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.7 hp | 98.7 hp | — |
| Engine declared | John Deere 6.359 DL-009 | Steyr WD-611.85 | differs |
| Displacement declared | 5.88 L | 5.18 L | +13% 3350 (A) |
| Maximum torque declared | 292 lb·ft · 396 N·m | 267 lb·ft · 362 N·m | +9% 3350 (A) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Pedal-operated dry LuK single-plate clutch as drive clutch | Dry Fichtel & Sachs single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 13.8 gpm · 52.3 L/min | 9.4 gpm · 35.5 L/min | +47% 3350 (A) |
| Pressure declared | 3,336 psi · 230 bar | 3,553 psi · 245 bar | +7% 8120 (a) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,315 lb · 4,225 kg | 8,477 lb · 3,845 kg | +10% 3350 (A) |
| Maximum permissible mass declared | 14,771 lb · 6,700 kg | — | — |
| Wheelbase declared | 100.4 in · 2,551 mm | 98.8 in · 2,509 mm | — |
| Length declared | 175.8 in · 4,465 mm | 163.0 in · 4,140 mm | +8% 3350 (A) |
| Width declared | 88.5 in · 2,249 mm | 84.3–104.5 in · 2,140–2,654 mm | differs |
| Ground clearance declared | 25.6 in · 650 mm | 17.3 in · 440 mm | +48% 3350 (A) |
| Turning radius, braked declared | — | 13.8 ft · 4.20 m | — |
| Fuel tank declared | 127.9–182.8 qt · 121.0–173.0 L | 128.9 qt · 122.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 3350 (A) sources
Source
- Source: Traktorenlexikon, “John Deere 3350”
Steyr 8120 (a) sources
Source
- Source: Traktorenlexikon, “Steyr 8120”