- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1978–1984
WhichTractor size, not the maker’s category
Steyr 8120 (a) Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the 8120 (a).
Engine power, claimed · gross or net not stated
98.7 hp
73.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 8120”, claimed
How much will an 8120 (a) lift?
An 8120 (a) lifts 8,957 lb (4,063 kg) at the lower-link ends.
| Pump flow | 9.4 gpm · 35.5 L/min |
|---|---|
| Steering pump flow | 5.8 gpm · 22.0 L/min |
| Hydraulic pressure | 3,553 psi · 245 bar |
| Rear remote valves | 1 |
| Lift capacity at ball ends | 8,957 lb · 4,063 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Steyr 8120”
What PTO does an 8120 (a) have?
An 8120 (a) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,057 rpm |
| Front PTO available, optional | Yes |
| PTO power, claimed | 89.8 hp · 67.0 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Steyr 8120”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “Steyr 8120”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 8120 — CC BY-SA 4.0, WIKIBOOKS-TL-72599 · revision 1015106. Wikibooks contributors (Traktorenlexikon). Original document