- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 1982
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
SOMECA 440 (TD) Full specifications
FIAT-IVECO 8035.02 three-cylinder diesel. The manufacturer claimed 44.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
44.4 hp
33.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Someca 440”, claimed
- Weight
- 4,189 lb
- 3-point lift
- 3,858 lb
- Hyd. flow
- 7.1 gpm
- Top speed
- 15.5 mph
SOMECA 440 (TD) specs: key facts
The SOMECA 440 (TD) was built in 1982.
The SOMECA 440 (TD) has a claimed engine power (gross or net not stated) of 33.1 kW (44.4 hp); it has no measured PTO figure.
The SOMECA 440 (TD) was offered in two-wheel-drive and four-wheel-drive versions.
The SOMECA 440 (TD) has a FIAT-IVECO 8035.02 engine, a 3-cylinder 2.59 L diesel unit.
The SOMECA 440 (TD) weighs 1,900 kg (4,189 lb) unladen.
The SOMECA 440 (TD) has a rear PTO running at 540 rpm.
The three-point hitch of the SOMECA 440 (TD) lifts 1,750 kg (3,858 lb) at the lower-link ends.
The hydraulic pump of the SOMECA 440 (TD) delivers 26.8 L/min (7.1 gpm).
Source · Traktorenlexikon, “Someca 440”
How much horsepower does a 440 (TD) have?
The only figure for the 440 (TD) is 44.4 hp (33.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Someca 440”
What engine is in a 440 (TD)?
A 440 (TD) has a FIAT-IVECO 8035.02, a 3-cylinder 2.59 L diesel engine.
| Make & model | FIAT-IVECO 8035.02 |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 158.2 ci · 2.59 L |
| Max torque | 114 lb·ft · 154 N·m @ 1,500 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Someca 440”
How much will a 440 (TD) lift, and what is its hydraulic flow?
A 440 (TD) lifts 3,858 lb (1,750 kg) at the lower-link ends.
| Pump flow | 7.1 gpm · 26.8 L/min |
|---|---|
| Pressure | 2,843 psi · 196 bar |
| Lift at ends | 3,858 lb · 1,750 kg |
| Rear PTO | 540 rpm @ 2,130 engine rpm |
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Someca 440”
What transmission does a 440 (TD) have?
Transmission specifications for the 440 (TD) are below.
| Clutch | Dry FEREDO double clutch |
|---|---|
| Steering | Mechanically operated GEMMER steering |
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “Someca 440”
How much does a 440 (TD) weigh?
A 440 (TD) weighs 4,189 lb (1,900 kg) unladen.
| Unladen weight | 4,189 lb · 1,900 kgTD: 2,180 |
|---|---|
| Wheelbase | 76.8 in · 1,950 mmTD: 1,980 |
| Length | 126.8 in · 3,220 mm |
| Width | 65.0 in · 1,650 mm |
| Height | 89.8 in · 2,280 mm |
| Ground clearance | 13.8 in · 350 mmTD: 320 |
| Front track | 50.4–74.0 in · 1,280–1,880 mmTD: 1,400 |
| Rear track | 51.2–74.8 in · 1,300–1,900 mm |
| Turning radius, braked | 9.7 ft · 2.95 mTD: 3,370 |
Source · Traktorenlexikon, “Someca 440”
Which tractors compare with a 440 (TD)?
Within 10% of its 44.4 hp of claimed engine power, the same type, and first built within 15 years of it.
- Fiat 440 (DT)44.4 hp engine, claimed · 1982Side by side with the 440 (TD) →
- Fiat 450 SV/SE44.4 hp engine, claimed · 1978–1982Side by side with the 440 (TD) →
- SOMECA 450 Special (TD)44.4 hp engine, claimed · 1978–1982Side by side with the 440 (TD) →
- SOMECA 450 Special V/E44.4 hp engine, claimed · 1978–1982Side by side with the 440 (TD) →
- AGRIFULL 340-C (S)44.4 hp engine, claimed · 1976–1977Side by side with the 440 (TD) →
- UTB U-453 DT44.4 hp engine, claimed · 1988–2004Side by side with the 440 (TD) →
Everything else people ask
Is a 440 (TD) two-wheel drive or four-wheel drive?
The SOMECA 440 (TD) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 440 (TD) have?
A 440 (TD) has a 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Someca 440”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Someca 440 — CC BY-SA 4.0, WIKIBOOKS-TL-121265 · revision 1067181. Wikibooks contributors (Traktorenlexikon). Original document